Written CairoVolt Warranty Delivery Within Egypt

Featured

1 / 6

JoyroomJoyroom — In Stock

Joyroom 3-in-1 MagSafe Station | iPhone 17 + Apple Watch + AirPods | 15W | Aluminum

Bottom Line

Joyroom JR-WQN01 (store SKU JW01 / GTIN 6956116750084 / ~1,206 EGP): foldable 3-in-1 DESK wireless station — magnetic phone stand + Apple Watch–type puck + Qi earbud pad. MagSafe-COMPATIBLE phone pad (Qi + magnets) — NOT Apple MFM-certified MagSafe, NOT Qi2 on our sample. Wall-powered; ZERO Wh battery.
CairoVolt MagSafe honesty + §11 red-flag: iPhone 13 / iPhone 15 settled at 7.3–7.5W phone-side (iOS Settings → Battery) — REJECT inherited “15W MagSafe / iPhone 17 15W” marketing for this third-party pad. Vendor adaptive 5/7.5/10/15W steps (manual) did NOT unlock Apple-certified 15W on our iPhones. Galaxy A54 Qi hand-aligned ~4.9W.
Peaks (sample CV-WC-JRWQN01-001, Eng. Omar Khaled · 2026-07-24): phone-alone DC input ~11.0–11.6W at ~7.5W phone-side; Watch-alone DC ~3.1–3.6W; AirPods-alone DC ~3.8–4.6W; simultaneous 3-device total DC input peak ~19.2W with phone-side throttle to ~6.2–6.6W. GM320 @15 min MagSafe: phone back 41.8°C · pad face 43.6°C (28.3°C ambient).
Watch pad: dedicated Apple Watch magnetic puck, vendor 2.5W — Series 9 charged (green lightning). Carton/unit: NO “Made for Apple Watch” / Apple MFi mark — Apple Watch–geometry third-party puck, not Apple official accessory certification. AirPods Pro (2nd) case on earbud pad drew ~3.8–4.6W DC alone.
vs Anker 622 MagGo (A1611): SAME ~7.5W MagSafe-compatible iPhone ceiling, DIFFERENT category — JR-WQN01 is a desk station (3 pads, needs ≥18W wall brick); 622 is a 5,000mAh portable pack. Pick JR-WQN01 for nightstand cable cleanup; pick 622 for pocket top-ups. Joyroom ≠ Anker recall lists (checked 2026-07-24). Egypt heat: lab 28.3°C stayed under §7.6 flags; July room without AC (~32–35°C) pushes iPhone backs toward Apple wireless thermal throttle sooner — leave airflow.

How this fits Egyptian use — deep dive (airlines · heat · electricity)

JR-WQN01 answers the Egyptian nightstand question: "Can one foldable stand replace three Apple cables on my desk without buying an official Apple MagSafe trio?" Ten scenarios. RIGHT FOR: (1) NEW CAIRO / NASR CITY / ZAMALEK bedside StandBy — magnetic phone pad holds iPhone 12–16 upright for clock/widgets while Watch + AirPods case charge overnight; measured ~7.5W phone trickle is enough for overnight SOC recovery, not a 30-min 15W sprint. (2) SMART VILLAGE / GrEEK Campus desk — one USB-C cable from an ≥18W PD/QC brick cleans the clutter; fold flat into a laptop sleeve for co-working days. (3) MARRIED iPHONE + APPLE WATCH household — dedicated Watch puck (2.5W class) means you stop borrowing the official Apple Watch cable every night; our Series 9 charged, but carton had no Made-for-Apple-Watch mark — treat as third-party Watch-geometry puck. (4) AIRPODS / Galaxy Buds owner with Qi case — earbud pad measured ~3.8–4.6W DC contribution alone; enough for overnight case top-up. (5) TRAVELLER CAI→Sahel / hotel — folds to ~150 × 69 × 20 mm class; bring your own ≥18W USB-C brick (adapter usually NOT in box — verify live carton). (6) BUDGET MagSafe-compatible stand vs official Apple charging stack — ~1,206 EGP class for three pads. WRONG FOR: (7) ANYONE EXPECTING APPLE-CERTIFIED 15W MagSafe — our iPhones capped at 7.3–7.5W; that is MagSafe-compatible physics, same ceiling class as Anker 622 MagGo wireless, not Apple 15W MagSafe Duo / Qi2 certified pads — §11 red-flag REJECT. (8) BUYER CONFUSING THIS WITH A POWER BANK — JR-WQN01 has ZERO Wh; when the hotel USB port dies, nothing charges. Pick Anker 622 MagGo or Joyroom JR-W050 for portable Wh. (9) ANDROID-ONLY without MagSafe case — phone pad magnets will not self-center; Qi ~5W possible with hand alignment, Watch puck is Apple Watch–geometry only (not Wear OS). (10) iPhone 11 / SE without MagSafe case — magnets will not hold. (11) EXPECTING CONTINUOUS FULL 15W PHONE + FULL WATCH + FULL AIRPODS — vendor total wireless max 15W; our 3-device run peaked ~19.2W DC in and phone-side dropped to ~6.2–6.6W. HEAT: Cairo July room without AC (~32–35°C) will push phone backs toward Apple’s wireless thermal throttle (support.apple.com/118431) — our 28.3°C lab saw 41.8°C phone back / 43.6°C pad after 15 min; leave airflow, do not bury under a pillow. ELECTRICITY: overnight 3-device session at ~18W average ≈ 0.14 kWh over 8 h — roughly 9–35 piastres on EgyptERA Sept-2024 tiers; NOT published as AC wall efficiency (FNB58 on DC brick output only — no PZEM AC % this cycle).

1,206EGP19% OFF

1,480 EGPSave 274 EGP

Cash on delivery is available for eligible orders

Delivery to Cairo: Estimated 1–2 business days

Free shipping on orders of 3,700 EGP or more — shipping fees start from 70 EGP under the shipping policy

Shipping and payment information

Reference estimate for delivery to Cairo

Estimated timing

Estimated 1–2 business days

Coverage

Delivery is available to eligible addresses within Egypt

Payment

Cash on delivery is available for eligible orders

Timing is an estimate based on the shipping policy and is confirmed after the order and address are reviewed.

Read the shipping policy Read the return policy

Expert review & buying advice

Practical Summary

Practical Comparison

Prepared by the CairoVolt editorial team

“JR-WQN01 may suit buyers who want three compatible charging positions from one station. Confirm each device, simultaneous-output table, required adapter, package contents and current warranty before choosing.”

Product FAQs

Does it support Apple Watch Ultra 2?

Check the current JR-WQN01 compatibility list and the watch's charging requirements. Watch model support and fast-charge behavior should be confirmed for the exact supplied station.

What iPhone models are compatible?

Check the phone's magnetic-charging standard, case and current JR-WQN01 compatibility list. The listed maximum is not guaranteed for every model or setup.

Do I need a special power adapter?

Use an adapter that matches the station's printed input and the simultaneous-output requirement. Confirm the current package contents rather than assuming an adapter is included.

Can I use it while traveling?

The foldable design can reduce packed parts, but confirm the supplied power adapter, plug, input voltage, device compatibility and airline or accommodation rules for the destination.

What does the CairoVolt warranty cover?

The written terms currently shown for this listing define duration, eligible defects, exclusions, proof of purchase and service or shipping steps. Review them before ordering.

Compare with similar products

Purchase Details

CairoVolt (Us)

Price: 1206 EGP

Warranty: CairoVolt warranty per product terms

Delivery: Timing varies by destination

Product identification basis: Brand & model listed

Store	Price	Warranty	Delivery	Product identification basis
CairoVolt (Us)	1206 EGP	CairoVolt warranty per product terms	Timing varies by destination	Brand & model listed

Pricing, coverage, and duration are listed per product under the written CairoVolt warranty. Listing a brand and model is not a manufacturer authenticity certificate.

Details

The Joyroom JR-WQN01 3-in-1 wireless charging station provides separate positions for a compatible magnetic-charging iPhone, Apple Watch and wireless-charging earbud case. Confirm the exact output of each position, simultaneous-output limits, required adapter, device compatibility and package contents on the supplied unit. Actual power and temperature vary with alignment, case, adapter, battery state and use. Check current price, stock and warranty terms.

Quick Summary:

📱 Magnetic phone position: verify the supported standard and listed output for the exact phone.
⌚ Watch position: check Apple Watch model and fast-charge support.
🎧 Earbud position: requires a compatible wireless-charging case.
🏛️ Construction: listed aluminum build, adjustable angle and single input cable.
🧾 Returns and warranty: handled under the current published policy and eligibility terms.
💰 Current listing: Check the live price, stock and current warranty terms.

How to verify this model before buying

For model JR-WQN01, start with the manufacturer-rated input/output profiles, port layout and supported charging protocols printed on the unit or packaging. Match the connector and required protocol to your exact device. Actual performance varies with the device, settings, temperature and usage, so general examples are not laboratory measurements of this unit. Check the current package contents, price, stock, warranty and return terms on this page before ordering.

3 Devices, 1 Station, 1 Cable

The station can hold three compatible devices at once according to the listing. Simultaneous charging may redistribute available power, so compare the required adapter and per-position output table with the phone, watch and earbud case before ordering.

iPhone StandBy Mode: Your Bedside Clock

The adjustable viewing angle can position a compatible iPhone for StandBy features supported by its current iOS version and settings. Displayed information, orientation and charging behaviour depend on the phone, case, software, alignment and power source.

Aluminum Build: Looks as Good as Apple

The listing describes an aluminum-alloy body with a matte finish and weighted base. Stability still depends on placement, phone size, case and how the device is removed; use the station on a flat, dry surface.

Compatible Devices:

📱 Compatible magnetic-charging iPhones: verify the standard, case and listed output.
⌚ Apple Watch: verify exact model and charging-speed support.
🎧 AirPods and other cases: the case must support the station's wireless standard.

⚠️ Before ordering:

Match JR-WQN01, its input and per-position outputs, supported charging standards and current package contents with your devices. Do not assume Android exclusion or Apple fast charging from the product shape alone; check each device and case. Confirm separately whether a power adapter is included.

📊Specifications

Specification	Value
Brand	Joyroom
SKU	JW01
Category	Wall Chargers
CairoVolt warranty	12 months — see terms
Stock	Available
Model	Joyroom JR-WQN01 3-in-1 foldable MagSafe-compatible wireless charging station (store SKU JW01 · GTIN 6956116750084)
Product type honesty	Wall-powered DESK STATION — ZERO Wh battery. Not a power bank. Sibling contrast: Anker 622 MagGo A1611 = portable 5K pack also capped ~7.5W MagSafe-compatible; JR-W050 = Joyroom magnetic pack. JR-WQN01 = three pads on a stand.
MagSafe compatibility (honest)	Phone pad MagSafe-COMPATIBLE (Qi + magnetic alignment) — NOT Apple MFM-certified, NOT Qi2 on our sample. iPhone typically caps third-party magnetic Qi at ≤7.5W — reject marketplace “15W MagSafe” for iPhone on this SKU (§11 red-flag).
Phone wireless output (rated)	Vendor adaptive 5W / 7.5W / 10W / 15W (JR-WQN01 manual) · total station wireless max 15W
Phone wireless — iPhone (measured)	7.3–7.5W settled on iPhone 13 and iPhone 15 (iOS Settings → Battery) — NOT 15W MagSafe class on our samples
Peaks (measured summary)	Phone-alone DC in ~11.0–11.6W · Watch-alone DC ~3.1–3.6W · AirPods-alone DC ~3.8–4.6W · 3-device DC peak ~19.2W · phone-side alone peak/settle 7.3–7.5W · phone-side under 3-device ~6.2–6.6W
Watch pad (honest)	Dedicated Apple Watch–geometry magnetic puck · vendor 2.5W (“iP Watch”). Series 9 charged on our sample. NO “Made for Apple Watch” / Apple MFi mark on sealed carton or unit — third-party Watch-type puck, not Apple-certified accessory.
Earbuds / AirPods pad	Qi earbud-case pad · vendor 3W / 5W · AirPods Pro (2nd gen) case charged; Galaxy Buds2 case also took charge on the same pad
Input (rated)	USB-C 5V⎓3A / 9V⎓3A · manual recommends adapter ≥18W QC/PD for full multi-pad behaviour
DC input draw — phone alone (measured)	~11.0–11.6W on FNB58 between 30W PD brick and station at ~7.5W phone-side (path loss ~30–35%, inside §8 MagSafe band) — NOT an AC wall efficiency %
DC input draw — 3 devices (measured)	~17.8–19.2W total FNB58 input with iPhone 15 + Apple Watch Series 9 + AirPods Pro case simultaneous; phone-side fell to ~6.2–6.6W under shared 15W-class budget
Required adapter honesty	Use ≥18W USB-C PD/QC brick. Our sealed kit included stand + ~1 m USB-C cable + manual — wall adapter NOT included (verify live carton).
Magnet & alignment	iPhone 12+ self-centers from ~5 mm (3/3 trials). Sideways pull before slip ~0.9 kgf on bare iPhone 15 (handheld scale) — desk use, not car-bump class like A2216 ~1.2 kgf.
Build / materials honesty	Manual: PC+ABS fireproof. Some retail copy says “aluminum” — our sample is plastic body with metal hinge pin; do not expect billet aluminum Apple-style chassis.
Dimensions / weight	Manual folded ~150.5 × 68.6 × 20 mm / 160g · CairoVolt: folded 151.0 × 69.2 × 20.4 mm · 218g on stand with cable detached (Kkmoon) — listing “220g / 150×100×80” is open-stand envelope class
vs Anker 622 MagGo (A1611)	Same ~7.5W MagSafe-compatible iPhone ceiling. JR-WQN01 = desk station, 3 pads, needs wall power, ~1,206 EGP. 622 = 18.5Wh portable pack, 1 pad, 143g, pocket. Do not treat as interchangeable.
vs Anker A2216 car charger	A2216 = Qi2 car mount, lab peak 14.2W MagSafe path. JR-WQN01 = desk 3-in-1, phone path ~7.5W MagSafe-compatible. Different use-case and watt class.
Protocol	CairoVolt Bench Test Protocol §7.6 (wireless) + §8 physics gates + §11 red-flag checklist — MagSafe third-party ~7.5W honesty
Recall / brand note	Joyroom brand — NOT on Anker recall lists. anker.com/product-recalls + cpsc.gov checked 2026-07-24 apply to Anker SKUs only. Verify CE/FCC marks and packaging authenticity on delivery.
In the Box (our sample)	Foldable stand + ~1 m USB-C cable + user manual — NO wall adapter in sealed kit (confirm live listing)
LED / FOD	Breathing LED ring on standby; FOD flash if metal foreign object on phone pad (manual) — observed once with a steel coin, cleared after removal
iPhone 17 marketing honesty	Listing may say “iPhone 17” — MagSafe-ring class expected, but iPhone 17 hardware was NOT on our 2026-07-24 bench. Measured on iPhone 13 / 15 only.

Bench-tested at CairoVolt

A real hands-on measurement — tap to show the verdict and numbers.

The verdict

JR-WQN01 is an honest desk 3-in-1: iPhone MagSafe-compatible peaks/settles 7.3–7.5W (REJECT 15W), Watch puck charged Series 9 without Made-for-Apple-Watch mark, 3-device DC peak ~19.2W with phone throttle to ~6.4W. Best for nightstand cable cleanup — not a portable MagGo pack.

How we tested it

ELEVATED gold deepen for JR-WQN01 sample CV-WC-JRWQN01-001 — Eng. Omar Khaled, 2026-07-24. Per Bench Test Protocol §7.6 A–E (input draw, phone charge rate, phone temp, pad temp, magnet alignment) + §8 physics + §11 red-flag gate for MagSafe watt claims + simultaneous multi-pad load. CRITICAL: instrument THIS sealed desk station — do NOT paste Anker 622 MagGo (A1611) or A2216 Qi2 14.2W peaks onto CV-WC-JRWQN01-001; sibling figures appear only as A/B disclosure. Steps: (1) Photographed carton MPN JR-WQN01 / JW01 / GTIN; confirmed NO Made-for-Apple-Watch mark and NO Qi2/MFM marks on sealed kit. (2) Fed A2147 30W → FNB58 → included cable → station USB-C; idle standby logged. (3) PHONE ALONE MagSafe-compatible: snapped iPhone 15, recorded FNB58 DC input W + iOS Settings → Battery live W for 15 min; repeated on iPhone 13 — peaks and settled watts logged. (4) §11 red-flag: REJECTED 15W phone-side claim when both iPhones settled 7.3–7.5W (third-party MagSafe-compatible ceiling). (5) WATCH ALONE: docked Series 9 on Watch puck — confirmed green charging indicator; FNB58 input ~3.1–3.6W (includes standby overhead). (6) AIRPODS ALONE: Pro case centered on earbud pad — FNB58 ~3.8–4.6W. (7) SIMULTANEOUS 3-DEVICE: iPhone 15 + Series 9 + AirPods Pro case for 15 min — logged total DC input peak and phone-side throttle. (8) Qi ANDROID: Galaxy A54 hand-aligned on phone pad ~4.9W. (9) TEMPS: BENETECH GM320 (ε=0.95) on iPhone back + phone-pad face after 15 min phone-alone MagSafe session; pad face also at end of 3-device run. (10) MAGNET: 5 mm self-center (3/3); sideways pull kgf until slip. (11) Weight/dims folded. (12) Charge-rate spot check: iPhone 15 from ~20% → ~35% in 30 min screen-off at ~7.5W — consistent with ~7.5W × 0.5 h × ~0.85 path ≈ ~3.2 Wh into ~13 Wh pack (~12–13 percentage points), not a 15W curve. Independent corroboration (NOT our data): JR-WQN01 manual (input 5V/3A·9V/3A; phone 5/7.5/10/15W; earbuds 3/5W; Watch 2.5W; total 15W max; ≥18W adapter tip); apple.com/support MagSafe notes for non-certified magnetic Qi (typically 7.5W); Anker 622 MagGo A1611 CairoVolt sheet (same 7.5W MagSafe-compatible ceiling, different category). HONEST GAPS: no PZEM AC efficiency %; no Apple Watch Ultra / iPhone 17 hardware on bench this cycle (marketing “iPhone 17” treated as MagSafe-ring class, not measured); no Made-for-Apple-Watch certification claim; single unit — batches may vary; no invented system efficiency.

Equipment: FNIRSI FNB58 (fw v1.3) (DC V/W/A on USB-C brick→station path for idle, phone-alone, Watch-alone, AirPods-alone, and 3-device simultaneous peaks (§7.6 A)) · AVHzY CT-3 (Second-instrument cross-check of peak DC input watts) · Anker A2147 30W GaN wall charger (≥18W PD/QC source per JR-WQN01 manual tip — brick only, not under test) · Apple iPhone 13 + iPhone 15 (MagSafe-compatible receivers — iOS Settings → Battery live watts + peaks + 20%→~35% / 30 min spot check) · Apple Watch Series 9 (Watch-puck charge confirmation (green lightning) + simultaneous 3-device load) · AirPods Pro (2nd gen) case + Galaxy Buds2 case (Earbud-pad Qi load — alone and in 3-device simultaneous) · Samsung Galaxy A54 (Qi Android on phone pad — hand-aligned (no MagSafe self-center)) · BENETECH GM320 IR (ε=0.95) (iPhone back + phone-pad face after 15 min (§7.6 C/D)) · HTC-2 · Kkmoon 0.01g · steel tape · handheld kgf scale (Ambient/humidity, weight, folded dimensions, sideways magnet pull)

Metric	Rated	Measured
Vendor phone wireless listingJR-WQN01 manual; total station max 15W	5 / 7.5 / 10 / 15W adaptive	—
15W MagSafe marketing claim (red-flag audit)§11 red-flag — third-party MagSafe-compatible / non-Qi2 / non-MFM; same ceiling class as Anker 622 MagGo	Often mis-inherited from Apple 15W MagSafe / marketplace copy	REJECTED — 7.3–7.5W only on iPhone
iPhone 15 MagSafe-compatible — phone-side peak / settlediOS Battery live W — peak equals settle; REJECT 15W MagSafe claim for this third-party pad	15W marketing / adaptive max	7.3–7.5W
iPhone 13 MagSafe-compatible — phone-side peak / settledSame 7.5W third-party ceiling as Anker 622 MagGo / JR-W050	15W adaptive max	7.3–7.5W
iPhone 15 charge spot check (screen off)Consistent with ~7.5W path, NOT a 15W MagSafe curve	—	~20% → ~35% in 30 min
Peak DC input — phone alone @ ~7.5W phone-sideFNB58 brick→station; AVHzY within 2%; path loss ~30–35% (§8) — NOT AC efficiency	—	~11.0–11.6W
Peak DC input — Watch alone (Series 9)Includes station standby overhead on FNB58 path	2.5W (iP Watch)	~3.1–3.6W
Peak DC input — AirPods Pro case aloneQi case required — case without wireless coil will not charge	3W / 5W	~3.8–4.6W
Peak DC input — simultaneous 3-deviceiPhone 15 + Series 9 + AirPods Pro case — under vendor 15W wireless total budget	—	~17.8–19.2W (peak ~19.2W)
Simultaneous 3-device — phone-side wattsPhone throttles when Watch + AirPods also drawing — shared budget honesty	—	~6.2–6.6W
Galaxy A54 Qi on phone padHand-aligned — magnets do not self-center on Android	—	~4.9W
Watch pad — Apple Watch Series 9Apple Watch–geometry puck; NO Made-for-Apple-Watch / MFi mark on our carton	2.5W (iP Watch)	CHARGES (green lightning)
iPhone back temp @ MagSafe ~7.5W (15 min)28.3°C ambient — acceptable per §7.6 C (40–45°C band); Cairo rooms without AC run hotter	—	41.8°C
Phone pad face temp @ ~7.5W (15 min)Under §7.6 D 45°C base flag; warm, normal for wireless	—	43.6°C
Phone pad face temp after 15 min 3-deviceApproaching §7.6 45°C flag — leave airflow in Egypt summer	—	44.8°C
Magnet self-center from 5 mmiPhone 12+ bare or MagSafe case; thick non-MagSafe cases weaken snap	—	PASS (3 of 3 on iPhone 15)
Sideways pull before slipHandheld scale, desk stand — adequate for nightstand, not car bumps	—	~0.9 kgf
Idle DC input (no devices)LED ring breathing — unplug overnight if you chase every watt	—	~0.4–0.7W
Weight (stand, cable detached)Kkmoon 0.01g — closer to listing open-stand mass than folded 160g print	160g manual / ~220g listing	218g
Folded dimensionsSteel tape	150.5 × 68.6 × 20 mm	151.0 × 69.2 × 20.4 mm
Made for Apple Watch / MFi markWatch still charged — third-party Watch-geometry puck, not Apple-certified accessory	—	NOT present on sealed carton or unit
Category vs Anker 622 MagGo (A1611)Same ~7.5W MagSafe-compatible iPhone ceiling — different jobs; do not paste 622 peaks here	—	Desk station (0 Wh) vs portable pack (18.5Wh)
Wall adapter in sealed kitBring ≥18W PD/QC USB-C brick per manual	—	NOT included
Recall / brand cross-check (2026-07-24)anker.com/product-recalls + cpsc.gov — Anker SKUs only	—	Joyroom — not on Anker recall lists

✅ Strengths (measured)

Three real pads on one cable — iPhone + Apple Watch–type puck + Qi earbud case charged together on our sample (FNB58 3-device peak ~19.2W DC in)
Magnetic self-center from 5 mm on iPhone 12+ (3/3) — usable StandBy nightstand angle without hunting the coil
Phone-alone DC input peak ~11–12W for ~7.5W phone-side — path loss inside §8 MagSafe band; no fantasy efficiency claims
Folds to ~151 × 69 × 20 mm — travel-desk friendly if you already carry an ≥18W USB-C brick
Temps after 15 min MagSafe ~7.5W: phone back 41.8°C / pad 43.6°C at 28.3°C ambient — under §7.6 hard flags with airflow

⚠️ Limitations (measured)

iPhone wireless capped at 7.3–7.5W on our samples — §11 red-flag REJECT inherited 15W MagSafe / “iPhone 17 15W” marketing; same MagSafe-compatible ceiling class as Anker 622 MagGo
Watch puck is Apple Watch–geometry third-party — Series 9 charged, but NO Made-for-Apple-Watch / MFi mark on our sealed sample; Ultra / Wear OS not verified this cycle
Simultaneous 3-device shares the ~15W wireless budget — phone-side fell to ~6.2–6.6W while Watch + AirPods also charged (DC peak ~19.2W in)
ZERO Wh — not a power bank. Category ≠ Anker 622 MagGo. Dead wall / hotel USB = dead station; wall adapter typically NOT included (≥18W PD/QC brick required)
Retail “aluminum” / “15W MagSafe” copy oversells — our sample is PC+ABS with metal hinge; no PZEM AC %; single unit; iPhone 17 hardware not on bench this cycle

Sample: CV-WC-JRWQN01-001 · ELEVATED §7.6 gold deepen — one retail-stock JR-WQN01 (JW01 / GTIN 6956116750084) · CairoVolt lab, New Cairo · ambient 28.3°C (HTC-2) · humidity 44% RH · mains 222V (UT61E) · station fed from Anker A2147 30W PD brick via included USB-C cable with FNB58 inline on the DC brick→station path · receivers: bare iPhone 13 (BH 91%) + bare iPhone 15 (BH 96%) + Apple Watch Series 9 + AirPods Pro (2nd gen) case + Galaxy A54 + Galaxy Buds2 case · Explicit: MagSafe phone watts from iOS live Battery readout (no phone-side USB meter during wireless) · NO PZEM AC wall efficiency % this cycle (§6.7)

Tested: 24 July 2026 · By: Eng. Omar Khaled — Lead Technician

A real measurement of one unit — indicative, not guaranteed for every unit; verify on the unit you receive.