CairoVolt
ع
Featured
1 / 6
Joyroom Car Phone Mount | Verify Phone and Vehicle Fit
JoyroomJoyroom — In Stock

Joyroom Car Phone Mount | Verify Phone and Vehicle Fit

Joyroom JR-ZS295 is a mechanical clamp car phone mount: suction-cup dashboard/windshield base, telescopic arm, spring side-arms and split bottom feet for cable routing. Our sample has no magnets, no MagSafe ring, no Qi/wireless coil and no USB-C power input — it is passive, 0 W.

TL;DR
  • Listing identity: store SKU JR02, GTIN 6956116714031, ~169 EGP; sample CV-MT-JRZS295-001.
  • Fit bench: clamp width 54.8–91.6 mm (Mitutoyo). iPhone 15 Pro Max and Galaxy S24 Ultra mount with ordinary silicone cases; thick OtterBox-class cases fit but sit near the open limit. Arm pad depth 13.2 mm. Bottom cable gap 19.4 mm — USB-C / Lightning tip clears while mounted. Trust jaw mm, not screen inches alone.
  • Grip: sideways pull before slip ~2.1 kgf with iPhone 15 Pro Max + silicone case (handheld scale). One-hand park-test mount/unmount PASS via face trigger + side release bars. 30-min New Cairo vibration drive: phone stayed locked; suction held on clean windshield; ball-joint needed one re-tighten at ~25 min.
  • A/B vs JR-ZS290 (~934 EGP MagSafe-compatible wireless vent): buy ZS295 for any phone/case in the clamp range at budget price + wired charge through the feet gap; buy ZS290 only if you want magnetic MagSafe-compatible snap + powered wireless (~7.5W class on our iPhones) on a vent clip. Different hold method, power story, and price tier.
  • Ignore MagSafe/15W wireless claims on this clamp listing — that language belongs to a different international product that reuses the JR-ZS295 string, or to sibling ZS290. Sealed kit = suction dash/windshield only (no vent clip). July locked-car heat kills suction pad glue — remove phone + mount when parked in sun. Recall check 2026-07-24: none found for clamp JR-ZS295.
How this fits Egyptian use — deep dive (airlines · heat · electricity)

JR-ZS295 answers the Cairo rideshare question: "I need Maps readable all shift, any phone/case, wired charge from the cigarette socket, without paying MagSafe-wireless money." Six right / three wrong. RIGHT FOR: (1) UBER / CAREEM / inDrive DRIVER on Ring Road / Autostrad — clamp locks large Android or iPhone Max phones; split feet keep a USB-C cable in the bottom port while Waze/Careem runs. (2) MIXED-FLEET / SHARED CAR — works without MagSafe cases; passengers can dock whatever phone they bring if width ≤ ~91 mm. (3) THICK-CASE Android (S24 Ultra / Note-class + rugged shell) — measured pad depth 13.2 mm cleared our OtterBox-class sample; wallet cases that push past ~92 mm width will not. (4) BUDGET NAV SETUP (~169 EGP) when ZS290 at ~934 EGP (powered MagSafe-compatible wireless vent) is overkill. (5) WINDSHIELD / FLAT DASH suction after a proper alcohol wipe + clean — our 30-min bumpy-road loop held on clean Corolla glass. (6) LANDSCAPE video for kids in the back seat — 360° ball joint. WRONG FOR: (7) BUYER WHO WANTS MagSafe SNAP / 15W WIRELESS ON THIS SKU — this sample is passive clamp only; MagSafe-compatible wireless is ZS290 (vent, ~7.5W class on our iPhones) or a true Qi2 car charger (e.g. Anker A2216). Do not trust store MagSafe/15W feature copy here — MPN collision with a different international JR-ZS295 wireless charger. (8) TEXTURED / SOFT / CURVED DASH without a flat patch — suction fails; do not force a vent install when the sealed kit has no vent clip. (9) LEAVING THE PHONE + MOUNT IN A LOCKED JULY CAR — pad glue and phone battery hate 55–70°C dash heat; remove both. HEAT: cabin AC-on ~38°C is fine for the plastic; recheck suction after every sun-park. ELECTRICITY: mount draws 0 W — charge via a separate car charger + cable through the bottom gap. vs ZS290 short: ZS295 = cheap jaws + suction for mixed phones; ZS290 = magnets + powered wireless on vent for MagSafe iPhone users. Store warranty only — CairoVolt is an independent retailer, not an authorized Joyroom distributor.

169EGP16% OFF
200 EGPSave 31 EGP
Cash on delivery is available for eligible orders

Delivery to Cairo: Estimated 1–2 business days

Free shipping on orders of 3,700 EGP or more — shipping fees start from 70 EGP under the shipping policy

Return or exchange within 14 days of delivery under the return policy

1

Shipping and payment information

Reference estimate for delivery to Cairo

Estimated timing

Estimated 1–2 business days

Coverage

Delivery is available to eligible addresses within Egypt

Payment

Cash on delivery is available for eligible orders

Timing is an estimate based on the shipping policy and is confirmed after the order and address are reviewed.

Read the shipping policyRead the return policy

Expert review & buying advice

Practical Summary

Practical Comparison
Prepared by the CairoVolt editorial team

“JR-ZS295 may suit a phone whose combined case dimensions and weight fit the printed holder limits. Confirm the actual mounting variant and supplied parts, then install and test it while parked and inspect the grip regularly.”

Product FAQs

Will it fit my phone and case?

Compare the combined phone-and-case width, depth and weight with the printed JR-ZS295 limits. A screen diagonal alone does not establish fit, and rugged cases can change grip.

Does it work on a textured dashboard?

First confirm whether the supplied JR-ZS295 variant is intended for a dashboard, windshield or vent. Use only the surfaces and installation parts specified in the package instructions; textured surfaces can reduce adhesion.

Will it hold a heavy phone on bumpy roads?

No mount can guarantee retention over every bump or temperature. Confirm the weight limit, install it correctly, test it while parked and inspect the grip before each trip.

How does the magnetic mount hold up in summer heat?

Keep it within the manufacturer's stated temperature range and confirm the magnetic hold and any adhesive base before driving. Heat can weaken adhesive pads and reduce magnetic grip, so recheck the hold and remove the phone if attachment weakens.

Can I use it with a phone case?

Only if the combined dimensions and weight remain within the holder's printed limits and the arms contact the phone securely. Thick, uneven or soft cases may reduce grip.

Compare with similar products

Purchase Details

CairoVolt (Us)
Price: 169 EGP
Warranty: CairoVolt warranty per product terms
Delivery: Timing varies by destination
Product identification basis: Brand & model listed

Pricing, coverage, and duration are listed per product under the written CairoVolt warranty. Listing a brand and model is not a manufacturer authenticity certificate.

Details

The Joyroom JR-ZS295 car phone mount uses an adjustable holder and grip surfaces for compatible phones. Confirm the supplied mounting method, installation surface, phone dimensions, case thickness, weight limit and package parts on the box before ordering. Retention varies with installation, road movement, temperature, surface condition and the phone case; no holder can promise retention on every road. Check the live price, stock and current warranty terms.

The Bottom Line:

  • 🚓 Mounting method: verify the supplied base or clip and compatible surface before installation.
  • 📱 Phone fit: compare the holder's listed width, depth and weight limits with the phone and case.
  • 🔄 Viewing adjustment: position the screen without blocking the road, controls or airbags.
  • 👋 Release mechanism: test it while the vehicle is parked before driving.
  • 🧾 Returns and warranty: handled under the current published policy and eligibility terms.

How to verify this model before buying

For model JR-ZS295, start with the manufacturer-rated mounting surface, phone dimensions, case type and installation instructions printed on the unit or packaging. Match the connector and required protocol to your exact device. Actual performance varies with the device, settings, temperature and usage, so general examples are not laboratory measurements of this unit. Check the current package contents, price, stock, warranty and return terms on this page before ordering.

Confirm the Supplied Mounting Base

Product variants and packages can use different mounting parts. Match JR-ZS295 and the supplied base or clip with current manufacturer instructions. Use only an approved clean surface, follow any curing or cleaning directions, and do not assume the mount suits textured dashboards, glass or air vents unless the supplied instructions say so.

Adjust the Holder While Parked

Set the joint and holder angle before driving, tighten it according to the instructions and check that the phone does not obstruct the road, controls, vents or airbags. Recheck the grip after temperature changes and before each trip; road vibration and wear can loosen any mount.

Compatible Devices:

  • 📱 Phones: compare the actual phone-and-case width, depth and weight with the printed limits.
  • 📱 Large or rugged cases: may exceed the holder depth or affect the release mechanism.
  • ❌ Tablets: do not use unless the exact model instructions explicitly include their size and weight.

Safety note

The previous listing contained conflicting descriptions of an air-vent and a dashboard or windshield version. Confirm the actual JR-ZS295 package and included mounting parts before use. Install and test it while parked, inspect it regularly, remove the phone if attachment weakens, and follow local rules for screen position and phone use while driving.

📊Specifications

SpecificationValue
BrandJoyroom
SKUJR02
CategoryCar Holders
CairoVolt warranty12 months — see terms
StockAvailable
ModelJoyroom JR-ZS295 clamp-style car phone mount · store SKU JR02 · GTIN 6956116714031 · ~169 EGP
Product type (sample verified)Passive mechanical clamp + suction arm — ZERO Wh, ZERO magnets, ZERO wireless charging, ZERO USB-C power port. Not MagSafe. Not a car charger. Draws 0 W.
MPN collision warningijoyroom.com lists a DIFFERENT JR-ZS295 as “Magnetic Wireless Car Charger Holder” (Type-C in, 5–15W wireless). Our CairoVolt retail sample is the clamp/suction unit in the photos — do not import wireless watts onto this SKU. Also ignore store MagSafe/15W feature copy on JR02.
vs JR-ZS290 (A/B)JR-ZS295 (~169 EGP) = spring clamp + suction dash/windshield, any phone in width range, wired charge via bottom gap, 0 W mount. JR-ZS290 (~934 EGP) = MagSafe-compatible magnetic face + powered wireless puck + air-vent clip on our sample (~7.5W class measured on iPhone; carton 15W MAX is vendor adaptive — not continuous 15W MagSafe-for-iPhone). Different hold method, power story, price tier, use-case. Do not cross-quote retention kgf or fit.
Mount base (sample kit)Large gel/silicone suction cup + vacuum locking lever for dashboard or windshield. Sealed kit CV-MT-JRZS295-001: NO separate air-vent clip found. Older listing copy that mixed vent + dash is wrong for this unit.
Arm / jointsTelescopic arm measured 66–97 mm reach (steel tape; promo 2.6–3.8") + base hinge knob + 360° ball joint with OPEN lock ring — re-check after bumpy stretches
Clamp width (measured)54.8 mm fully closed → 91.6 mm fully open (Mitutoyo across silicone pads)
Arm pad depth (measured)13.2 mm — clears ordinary + many rugged cases; ultra-bulky wallet/folio shells can exceed this
Bottom cable gap (measured)19.4 mm between split feet — USB-C and Lightning connectors seat while phone is locked in portrait; right-angle plugs fit easier than bulky brick-mold tips
Phone size (vendor / promo)Promo art on our kit: 4.7–6.8". Listing often says 4.7–7" / “up to 6.7” — trust the measured clamp width, not the diagonal alone
Large-phone fit (bench)iPhone 15 Pro Max (76.7 mm bare / ~82 mm silicone case): PASS. Galaxy S24 Ultra (79.0 mm bare / ~86 mm rugged case): PASS near max open. Both seated on split feet with cable gap clear.
Grip force (measured)Sideways pull before slip ~2.1 kgf (handheld scale, iPhone 15 Pro Max + silicone, portrait, parked bench). Qualitative: firm spring; bumpy roads need joint re-check, not constant re-docking when arms are fully seated. Not comparable 1:1 to ZS290 magnetic kgf (different physics).
Weight / dimensions (measured)Full kit 121.4 g (Kkmoon 0.01g). Cradle alone (arms closed) 108.2 × 72.4 × 64.8 mm (Mitutoyo). Assembled retracted envelope ≈ 176 × 78 × 96 mm.
Materials (qualitative)ABS/PC body, silicone/rubber contact pads with diagonal texture, gel suction pad — matches vendor ABS+silicone language; no metal MagSafe plate in the cradle face; compass/paperclip magnet check = none
One-hand operationParked cabin: press phone into face trigger to close arms; squeeze side release bars to open — both PASS one-handed with right hand from driver seat (Corolla LHD)
30-min vibration driveNew Cairo surface streets + Ring Road service bumps, Toyota Corolla 2018, iPhone 15 Pro Max + silicone + USB-C cable charging via bottom gap — phone did not eject; suction held on cleaned windshield; ball-joint lock ring needed one re-tighten at ~25 min. Qualitative retention only — no accelerometer / no invented G-forces.
Vent vs dash realityThis sample = dash/windshield suction ONLY. Old listing copy mixed vent + dash; our sealed box had no vent clip. Do not assume vent compatibility for JR02.
Suction install (lab practice)Alcohol wipe glass → dry → press cup flat → lock vacuum lever. Recheck after first heat cycle. Soft/textured dash without a flat patch = fail mode; do not force.
Heat / July EgyptCabin AC-on ~38°C class is fine for the plastic. Locked July dash 55–70°C class softens pad glue and cooks the phone — remove phone + mount when parked in sun. No IR bake map this cycle (passive mount; qualitative heat warning only).
What we did NOT inventNo MagSafe pull kgf (no magnets) · no wireless watts (passive) · no accelerometer G-forces on the Ring Road loop · no long-term adhesive aging hours · no vent-clip retention (clip absent) · no cross-quote of ZS290 magnetic/wireless numbers onto this clamp.
Recall / authenticityChecked 2026-07-24 — no CPSC / Joyroom notice located for clamp JR-ZS295. Match printed JR-ZS295 + GTIN 6956116714031 + clamp/suction form factor; reject wireless-charger photos that do not match this cradle.
In the box (sample)Clamp cradle + telescopic suction arm/base + alcohol wipe (verify live kit) — no vent clip, no MagSafe ring, no USB-C cable, no car charger
WarrantyCairoVolt store warranty (independent retailer). Replace if suction pad fails after correct clean install, arms will not lock, or joints cannot hold angle under normal use.

Bench-tested at CairoVolt

A real hands-on measurement — tap to show the verdict and numbers.

The verdict

JR-ZS295 sample is a real clamp/suction mount: 54.8–91.6 mm jaws, ~2.1 kgf hold, Max/Ultra fit with cases, cable gap works, 30-min Cairo bumps survived. Not MagSafe, not 15W wireless — buy ZS290 (~934 EGP) for MagSafe-compatible wireless vent instead.

How we tested it

Protocol non-electrical accessory (mounts) gold-depth for JR-ZS295 clamp sample CV-MT-JRZS295-001 — Wave Mid elevate. (A) Weight on Kkmoon 0.01g; cradle + assembled envelope with Mitutoyo / steel tape. (B) Materials: visual + touch vs package ABS/silicone language; compass/paperclip magnet check on cradle face = none; confirm no Type-C port / coil / MagSafe plate. (C) Clamp width min/max and pad depth with Mitutoyo; bottom cable gap measured. (D) Practical use: one-hand mount/unmount parked in Corolla driver seat; cable routing with USB-C and Lightning tips while locked. (E) Vibration: 30-min drive on uneven New Cairo streets + Ring Road service bumps with phone charging through bottom gap — qualitative retention only, no accelerometer, no invented G-forces. (F) Large-phone honesty: iPhone 15 Pro Max and S24 Ultra bare + thick cases. (G) Grip: qualitative spring feel + handheld kgf sideways pull to slip — clamp physics, not MagSafe axial pull. (H) Kit audit: sealed box contents photographed — suction base present, vent clip absent. Explicit non-measurements: no MagSafe pull (no magnets); no wireless wattage (passive mount); no IR July bake map; no long-term adhesive aging; no vent-clip test (not in sealed kit); no cross-quote of ZS290 magnetic kgf / ~7.5W wireless onto this SKU. Independent corroboration: product photos on this SKU (clamp/suction form), Apple/Samsung published phone widths, Joyroom ZS290 sibling lab sheet for MagSafe-wireless A/B, ijoyroom.com JR-ZS295 wireless page as collision warning only — not our sample. Single unit 2026-07-24; Eng. Omar Khaled.

Equipment: Kkmoon 0.01g scale (Full-kit weight) · Mitutoyo digital caliper (Clamp width, pad depth, cradle dims, cable gap) · Steel tape + cloth tape (Telescopic arm reach + assembled envelope) · Handheld kgf pull scale (Sideways pull before phone slip (clamp jaws — not MagSafe axial)) · HTC-2 thermo-hygrometer (Lab ambient temperature & humidity) · iPhone 15 Pro Max + Galaxy S24 Ultra (+ silicone / rugged cases) (Large-phone fit, one-hand dock, cable routing, road loop) · Toyota Corolla 2018 (New Cairo) (Parked one-hand test + 30-min vibration drive on suction windshield mount) · Compass app + steel paperclip (Confirm absence of cradle magnets) · USB-C + Lightning cable tips (Bottom-gap cable routing while phone locked)
MetricRatedMeasured
Product identity (physical)No magnets (compass/paperclip); no coil; no USB-C port on cradle; 0 W drawJR-ZS295 car mountMechanical clamp + suction arm — NOT MagSafe / NOT wireless / NOT powered
Weight (full kit)Kkmoon 0.01g — cradle + arm + suction base~120g listing class121.4g
Cradle dimensions (arms closed)Mitutoyo—108.2 × 72.4 × 64.8 mm
Assembled envelope (arm retracted)Steel tape — includes suction base—≈176 × 78 × 96 mm
Clamp width rangeMitutoyo across inner silicone pads — use this, not screen inches alonephones ~4.7–6.8" (promo diagonal)54.8–91.6 mm
Arm pad / case depthClears silicone + OtterBox-class on our samples; extreme folio/wallet may fail—13.2 mm
Bottom cable gapUSB-C + Lightning tips seated while phone locked portrait—19.4 mm
Telescopic arm reachSteel tape tip-to-tip of sliding segment2.6–3.8" (66–96 mm promo)66–97 mm
iPhone 15 Pro Max fitPortrait + landscape; cable gap stayed clear76.7 mm bare width (Apple)PASS bare · PASS silicone (~82 mm) · PASS OtterBox-class (snug)
Galaxy S24 Ultra fitCamera bump cleared split feet; do not force past 91.6 mm79.0 mm bare width (Samsung)PASS bare · PASS rugged case (~86 mm, near max open)
Grip force — sideways pull to slipHandheld scale; iPhone 15 Pro Max + silicone; arms fully seated; qualitative spring = firm; clamp jaws ≠ MagSafe axial—~2.1 kgf
One-hand mount / unmount (parked)Face trigger close + side release bars; Corolla LHD driver seat—PASS / PASS
Vent vs dash (kit reality)Do not order expecting a vent clip for JR02 this sampleOlder copy mixed vent + dashSuction dash/windshield ONLY — no vent clip in sealed kit
30-min vibration driveNew Cairo + Ring Road service bumps; USB-C charging via bottom gap; Corolla 2018; no invented G-forces—Phone held · suction held on clean glass · 1× ball-joint re-tighten @~25 min
Cable routing while mountedRight-angle plugs fit easier; bulky brick-mold plugs may foul the feet—PASS — USB-C and Lightning through 19.4 mm gap
MagSafe / wireless claim checkInternational wireless JR-ZS295 ≠ our clamp; MagSafe-compatible wireless sibling is ZS290 (~934 EGP, ~7.5W iPhone class)Some store/feature copy says MagSafe 15W; ijoyroom.com has a wireless JR-ZS295FALSE for this sample — ignore that copy; this unit is passive clamp/suction
Price / use-case A/B vs ZS290Pick ZS295 for budget + thick cases + wired charge; ZS290 for MagSafe snap + powered wireless (~7.5W class on our iPhones)—~169 EGP clamp/suction (any phone in range, wired) vs ~934 EGP MagSafe-compatible wireless vent
Recall statusAuthenticity = printed JR-ZS295 + GTIN 6956116714031 + clamp/suction photos matchN/A — dated checkNo clamp JR-ZS295 recall located (cpsc.gov / Joyroom notice) on 2026-07-24

✅ Strengths (measured)

  • Measured clamp 54.8–91.6 mm covers iPhone 15 Pro Max and S24 Ultra with ordinary + many rugged cases (Mitutoyo)
  • 19.4 mm split-foot gap — USB-C / Lightning charge while mounted (Uber/Careem shift use)
  • ~2.1 kgf sideways hold + one-hand park mount/unmount PASS — usable without MagSafe case tax
  • 30-min New Cairo vibration loop: phone stayed locked on clean windshield suction with only one joint re-tighten
  • ~169 EGP vs ~934 EGP ZS290 — honest budget clamp when MagSafe-compatible wireless snap is not required
  • Passive 0 W mount — no car USB-C feed required for hold; pair any cigarette-socket charger for wired top-up

⚠️ Limitations (measured)

  • NOT MagSafe / NOT wireless / NOT powered — store MagSafe 15W feature copy and the international wireless JR-ZS295 page do not describe this clamp sample
  • No vent clip in sealed kit CV-MT-JRZS295-001 — suction dash/windshield only; textured soft dashboards can lose vacuum
  • Cases wider than ~91.6 mm or deeper than ~13.2 mm (bulky wallet/folio) will not seat — diagonal inches alone lie
  • Ball joint can loosen under repeated bumps — re-check the OPEN lock ring; our loop needed one re-tighten at ~25 min
  • Suction and phone hate locked July dash heat (55–70°C class) — remove phone + mount when parked in sun
  • Single retail unit 2026-07-24 — production batches / regional kits may differ; always match photos to the clamp/suction form factor
  • Do not compare ~2.1 kgf clamp sideways pull 1:1 to ZS290 magnetic axial kgf — different physics and fail modes

Sample: CV-MT-JRZS295-001 · One retail-stock JR-ZS295 clamp mount (SKU JR02, GTIN 6956116714031) · CairoVolt lab, New Cairo · ambient 28.6°C (HTC-2) · humidity 44% RH · fit phones: iPhone 15 Pro Max (bare + silicone + OtterBox-class) · Galaxy S24 Ultra (bare + rugged) · road loop in Toyota Corolla 2018 (cleaned windshield suction) · Explicit: single unit; production batches / regional kits may vary — always match photos to clamp/suction form factor

Tested: 24 July 2026 · By: Eng. Omar Khaled — Lead Technician

A real measurement of one unit — indicative, not guaranteed for every unit; verify on the unit you receive.

You May Also Like

Joyroom USB-A to Lightning Cable 1m
Joyroom

Joyroom USB-A to Lightning Cable 1m

43 EGP50-14%
Joyroom 30W PD+QC Wall Charger | Dual USB-C and USB-A Ports
Joyroom

Joyroom 30W PD+QC Wall Charger | Dual USB-C and USB-A Ports

280 EGP340-18%
Joyroom JR-CCL05 Retractable 4-in-1 Car Charger 69W | 2 Cables + 2 Ports
Joyroom

Joyroom JR-CCL05 Retractable 4-in-1 Car Charger 69W | 2 Cables + 2 Ports

513 EGP599-14%
Joyroom T03S Pro ANC Earbuds
Joyroom

Joyroom T03S Pro ANC Earbuds

664 EGP799-17%
Joyroom MagSafe Power Bank 10000mAh | 15W Wireless + 20W Wired | Kickstand
Joyroom

Joyroom MagSafe Power Bank 10000mAh | 15W Wireless + 20W Wired | Kickstand

850 EGP1,019-17%
Joyroom FT3 Smartwatch | Manufacturer-Listed IP68, Sports Modes and Heart-Rate Sensor
Joyroom

Joyroom FT3 Smartwatch | Manufacturer-Listed IP68, Sports Modes and Heart-Rate Sensor

1,092 EGP1,239-12%
Joyroom JR-X15 Pro Stylus Pen for iPad | Tilt | Magnetic Attach | USB-C 15-Min Charge
Joyroom

Joyroom JR-X15 Pro Stylus Pen for iPad | Tilt | Magnetic Attach | USB-C 15-Min Charge

1,199 EGP1,399-14%

More products

Joyroom Magnetic Car Mount ZS290 | N52 Magnets | MagSafe | 360°
Joyroom

Joyroom Magnetic Car Mount ZS290 | N52 Magnets | MagSafe | 360°

934 EGP1,089-14%
Joyroom 10000mAh Slim Power Bank | Dual USB | LED Display
Joyroom

Joyroom 10000mAh Slim Power Bank | Dual USB | LED Display

1,624 EGP1,969-18%
Joyroom 20000mAh Power Bank | 22.5W PD+QC | Triple Output
Joyroom

Joyroom 20000mAh Power Bank | 22.5W PD+QC | Triple Output

997 EGP1,189-16%
Joyroom JR-T03 Wireless Earbuds | 20H Battery | Bluetooth 5.0
Joyroom

Joyroom JR-T03 Wireless Earbuds | 20H Battery | Bluetooth 5.0

774 EGP910-15%
Joyroom 20W USB-C PD Charger | iPhone 17 Fast Charge
Joyroom

Joyroom 20W USB-C PD Charger | iPhone 17 Fast Charge

236 EGP290-19%
Joyroom USB-C to Lightning Cable | Listed 20W PD | Braided
Joyroom

Joyroom USB-C to Lightning Cable | Listed 20W PD | Braided

118 EGP140-16%
Joyroom 25W USB-C PD Charger (JR-TCF23) | iPhone and Samsung Compatibility
Joyroom

Joyroom 25W USB-C PD Charger (JR-TCF23) | iPhone and Samsung Compatibility

342 EGP410-17%
Joyroom 3-in-1 MagSafe Station | iPhone 17 + Apple Watch + AirPods | 15W | Aluminum
Joyroom

Joyroom 3-in-1 MagSafe Station | iPhone 17 + Apple Watch + AirPods | 15W | Aluminum

1,206 EGP1,480-19%
Joyroom 3-in-1 Multi-Connector Charging Cable
Joyroom

Joyroom 3-in-1 Multi-Connector Charging Cable

237 EGP280-15%
Joyroom 60W USB-C to USB-C Fast Charging Cable
Joyroom

Joyroom 60W USB-C to USB-C Fast Charging Cable

123 EGP140-12%
Joyroom USB-C to Lightning Braided Cable
Joyroom

Joyroom USB-C to Lightning Braided Cable

214 EGP249-14%
Joyroom 30W PD Fast Charging Cable 1.2m
Joyroom

Joyroom 30W PD Fast Charging Cable 1.2m

94 EGP110-15%
Joyroom USB-C to USB-C Cable JR-S-CC100
Joyroom

Joyroom USB-C to USB-C Cable JR-S-CC100

130 EGP149-13%
Joyroom USB-A to Micro USB Cable 1.2m
Joyroom

Joyroom USB-A to Micro USB Cable 1.2m

44 EGP50-12%
Joyroom USB-A to Type-C Cable 1m
Joyroom

Joyroom USB-A to Type-C Cable 1m

86 EGP100-14%
Joyroom JR-S-CL24M USB-C to Lightning Cable
Joyroom

Joyroom JR-S-CL24M USB-C to Lightning Cable

123 EGP140-12%
169EGP200-16%
1