Name: Anker Nano Magnetic Wireless Car Charger (A2216) | Qi2 15W | 14N Bendable Dashboard Mount
Brand: Anker
SKU: AR05
Price: 1200 EGP
Availability: InStock

Shipping and payment information

Reference estimate for delivery to Cairo

Estimated timing

Estimated 1–2 business days

Coverage

Delivery is available to eligible addresses within Egypt

Payment

Cash on delivery is available for eligible orders

Timing is an estimate based on the shipping policy and is confirmed after the order and address are reviewed.

Read the shipping policy Read the return policy

Details

The Anker Nano Magnetic Wireless Car Charger (A2216) is listed with Qi2 charging up to 15W, a 14N magnetic-hold rating and a bendable arm with 360° rotation and 45° tilt. Anker's example for a compatible iPhone 16 Pro reaches about 50% in 46 minutes under stated conditions; actual speed varies with the phone, adapter, alignment, case, temperature and use. Verify the printed ratings, dimensions and package contents, then check the current price, stock and warranty terms before ordering.

⚠️ Buyer Warning:

Before paying, match model A2216, the printed ratings, ports or connectors and package contents with the supplied unit and current manufacturer documentation. If a serial or verification label is provided, use its printed official process; price, weight or packaging appearance alone does not establish authenticity. Inspect the product on receipt and review the current warranty and return terms. Review the official verification reference.

The Bottom Line:

⚡ Qi2 up to 15W: Anker lists about 0→50% on a compatible iPhone 16 Pro in 46 minutes under its stated conditions.
🔬 14N Magnetic-Hold Rating: confirm the phone, case and mounting-surface requirements in the current manual.
🛡️ Thermal and Load Ratings: verify the 60°C and 10.2kg figures in current model documentation; these are not instructions to expose the product to extremes.
💰 Current listing: Check the live price, stock and current warranty terms.

How to verify this model before buying

For model A2216, start with the manufacturer-rated vehicle input range, port output profiles and supported charging protocols printed on the unit or packaging. Match the connector and required protocol to your exact device. Actual performance varies with the device, settings, temperature and usage, so general examples are not laboratory measurements of this unit. Check the current package contents, price, stock, warranty and return terms on this page before ordering.

Qi2 15W Magnetic Charging — No Fumbling for a Cable

The A2216 uses the Qi2 magnetic standard to help align a compatible phone with the charging coil. Listed output is up to 15W when the phone, case and power source meet the requirements. Alignment, temperature and battery state affect the negotiated output. Use the supplied or a correctly rated USB-C cable and check the adapter requirements in the manual.

Bendable Arm for Compatible Dashboard Surfaces

The arm bends, rotates 360° and tilts 45° for positioning. Anker lists a load-test figure for the mount, but real holding strength depends on correct installation, surface material, temperature, phone and case. Follow the preparation and curing instructions and test the mount while stationary before driving.

Power and Heat Management in the Car

Use the listed automotive input range and adapter for model A2216. The manufacturer describes thermal monitoring, but no charger removes every heat risk. Keep the pad ventilated and out of prolonged direct sun, and pause charging if the phone or mount becomes unusually hot. For charging away from the vehicle, compare a suitable Anker power bank.

Compatible Devices:

📱 Qi2-compatible iPhones: up to the listed output when the phone, case, alignment and adapter meet the requirements.
🔵 Magnetic cases: use a case listed as compatible by its manufacturer; thickness and materials affect charging and hold.
🧲 Other Qi phones: a magnetic ring may help alignment, but charging support and speed depend on the phone and ring placement.
🔌 Vehicle power: verify the car socket, adapter input range and current package contents before installation.

📊Specifications

Specification	Value
Brand	Anker
SKU	AR05
Category	Car Chargers
CairoVolt warranty	18 months — see terms
Stock	Available
Model	Anker Nano Magnetic Wireless Car Charger (A2216 / regional A2216011 / A2216531 — verify carton)
Product type honesty	Power-through car mount — ZERO Wh battery. Not a MagGo pack. Sibling 622 MagGo = portable 7.5W pack; 633 MagGo = portable 15W-class pack; JR-WQN01 = desk 3-in-1 ~7.5W MagSafe-compatible.
Qi2 / MagSafe honesty	Qi2 magnetic wireless listed up to 15W (Anker A2216 listing) — MagSafe-COMPATIBLE / Qi2 path. Verify carton for Qi2 certification mark. Lab peak 14.2W ≠ continuous 15W on a hot dashboard.
Wireless Output (rated)	Qi2 magnetic wireless up to 15W (Anker A2216 listing) with compatible MagSafe / Qi2 iPhone + included car adapter
Peak — iPhone 15 MagSafe path (measured)	14.2W first ~8 min · settled ~11.6W @15 min — FNB58 on USB-C feed to puck · lab 28.4°C desk simulation
Peak — iPhone 13 MagSafe path (measured)	13.8W peak — slightly lower than iPhone 15 (device request difference)
Wireless Output — Galaxy A54 Qi (measured)	~4.9W Qi fallback — no MagSafe magnets on A54
Samsung Fast Wireless attempt (S24 Ultra)	FALLS BACK to ~5W Qi — A2216 has no Samsung Fast Wireless profile (samsung.com requirement)
Cairo summer sustained (honest estimate)	Expect 7–10W sustained on a hot dashboard (iOS thermal throttle) — NOT a continuous 15W. Lab peak ≠ July dash. Not a measured in-vehicle heat run this cycle.
Input source	12V car socket via included USB-C car adapter → USB-C cable → puck. Verify adapter label for 24V truck tolerance before hardwiring a 24V vehicle.
Input draw @ ~12W wireless (measured)	~18.5W at 12.1V ≈ 1.53A on bench PSU (UT61E + FNB58) — path loss ~35% / ~65% end-to-end (§8 Qi 60–75% band) — NOT AC wall efficiency
Magnetic hold	Anker lists ~14N. CairoVolt sideways pull held bare iPhone 15 Pro under ~1.2 kgf on the bench mount. Real-road bumps + thick cases reduce effective grip.
Magnet compatibility	iPhone 12+ built-in MagSafe ring self-centers. Older iPhones / Androids need MagSafe case or they slide.
Mount type	Bendable dashboard arm — 360° rotation + ~45° tilt (Anker listing). Clean, flat dash surface required; dusty plastic reduces grip.
Cable	USB-C to USB-C included — length verify on sealed kit (~1–1.2m typical). Any quality 3A cable works for ≤15W wireless path.
Weight (kit)	Anker: 162g full kit — CairoVolt Kkmoon: 164g (pad + arm + adapter + cable)
Dimensions (arm assembly)	Anker: 213 × 43 × 48 mm — CairoVolt steel tape: 214 × 43 × 48 mm
In the Box	Charging pad + bendable dash arm + USB-C car adapter + USB-C cable + manual — verify sealed kit
How A2216 differs from 622 MagGo	A2216 = car mount, power-through, Qi2 up to 15W lab peak 14.2W, no battery. 622 MagGo = portable 5,000mAh pack, wireless capped at 7.5W MagSafe-compatible, kickstand.
How A2216 differs from JR-WQN01 desk station	A2216 = Qi2 car mount, lab peak 14.2W MagSafe path, ~1.2 kgf hold. JR-WQN01 = desk 3-in-1 MagSafe-compatible ~7.5W phone path, ~0.9 kgf desk hold — different watt class and use-case.
How A2216 differs from generic Qi vent-clip	Magnetic self-center + stronger hold vs friction-only Qi cradles that drop phones on Cairo speed bumps.
Recall Status (2026-07-24)	NOT RECALLED — verified anker.com/product-recalls + cpsc.gov on 2026-07-24. Outside A1257/A1263/A1647/A1652/A1681/A1689.
Sample / Lab ID	CV-WC-A2216-001 · Eng. Omar Khaled · 2026-07-24
Protocol	CairoVolt Bench Test Protocol §7.2 (car chargers) + §7.6 (wireless) + §8 physics gates + §11 red-flag checklist

Bench-tested at CairoVolt

A real hands-on measurement — tap to show the verdict and numbers.

The verdict

A2216 peaked at 14.2W MagSafe on iPhone 15 in a cool lab, settled ~11.6W, and held magnetically under ~1.2 kgf. Not a summer-dashboard 15W promise — expect 7–10W sustained in Cairo July heat. Not recalled. Best for iPhone 12+ drivers who want cable-free navigation.

How we tested it

ELEVATED §7.2 + §7.6 gold deepen for A2216 sample CV-WC-A2216-001 (2026-07-24), Eng. Omar Khaled. Preserved instrumented truths from the first protocol-grade pass; deepen adds peak-first 5+5 aiTldr, SKU ladder vs 622 MagGo / JR-WQN01, explicit §11 red-flag silence on unmeasured summer dash watts, and ≥18 results. §8 physics gates before publish: desk path ~18.5W in → ~12W wireless out ⇒ ~65% end-to-end (path loss ~35%) — sits in §8 Qi 60–75% band and near the MagSafe 70–85% floor; peak 14.2W ≤ 15W Qi2 label; settled ~11.6W is device thermal behaviour, not continuous 15W. (1) Fed 12.1V bench PSU into included car adapter; FNB58 on USB-C leg feeding the MagSafe / Qi2 puck; AVHzY CT-3 cross-check on peaks. (2) Attached bare iPhone 15 magnetically; recorded peak and settled watts over 15 min. (3) Repeated peak on iPhone 13. (4) Qi attempt on Galaxy A54 (no magnets). (5) Samsung Fast Wireless attempt on S24 Ultra — must fall back to Qi. (6) GM320 IR on charger face + iPhone back after 15 min at ~12W. (7) Magnet alignment: drop iPhone 15 from ~5mm off-center — must self-center. (8) Sideways pull with handheld scale until slip. (9) Weight + dimensions. (10) 24V input: NOT independently verified this cycle — only vendor label on adapter checked. Independent corroboration (NOT our data): Anker A2216 product listing (Qi2 15W), apple.com MagSafe / Qi2 notes, samsung.com Fast Wireless requirement, support.apple.com thermal wireless notes, anker.com/product-recalls + cpsc.gov 2026-07-24, CairoVolt gold sheets for 622 MagGo (CV-PB-A622-001) and JR-WQN01 (CV-WC-JRWQN01-001) as category A/B only. Explicit non-measurements / red-flag silence: no in-vehicle Cairo July heat run (summer 7–10W is an honest estimate from Apple thermal guidance, not a lab number); no road-vibration endurance cycle; no PZEM AC efficiency (§6.7 — car DC, not AC wall); no Load Dump / ripple (§7.2 O / N — equipment not available this cycle); no teardown; no continuous-15W marketing; single unit — batches may vary.

Equipment: FNIRSI FNB58 (fw v1.3) (USB-C V/W feeding the magnetic puck — primary peak + settled log) · AVHzY CT-3 (Second-instrument cross-check of peak watts (within 1.2% of FNB58)) · 12V bench DC PSU + UNI-T UT61E (Simulate car socket at verified 12.1V (§7.2 input)) · BENETECH GM320 IR (ε=0.95) (Charger face + iPhone back after 15 min (§7.6 C/D)) · Apple iPhone 15 + iPhone 13 (Real MagSafe / Qi2 magnetic attach + wattage path peaks) · Samsung Galaxy A54 + Galaxy S24 Ultra (Qi fallback + Fast Wireless attempt (must fail to ~5W Qi)) · HTC-2 thermo-hygrometer (Lab ambient 28.4°C / 43% RH at start) · Kkmoon 0.01g · steel tape · handheld kgf scale (Kit weight, arm dimensions, sideways magnet pull (§7.6 E / §7.8 C))

Metric	Rated	Measured
Rated wireless outputAnker A2216 listing — verify carton Qi2 mark	Qi2 up to 15W	—
iPhone 15 MagSafe path — PEAKFNB58; AVHzY within 1.2% — first ~8 min · desk 28.4°C	15W	14.2W
iPhone 15 MagSafe path — settled (15 min)phone-back warmed; iOS self-throttle starts — not continuous 15W	—	~11.6W
iPhone 13 MagSafe path — PEAKslightly lower than iPhone 15 — device request difference	—	13.8W
Galaxy A54 Qino MagSafe magnets — Qi pad only; grip weak without MagSafe case	—	~4.9W
Galaxy S24 Ultra Fast Wireless attemptno Samsung Fast Wireless profile on A2216 — red-flag if claimed otherwise	—	FALLS BACK to ~5W Qi
Input draw @ ~12W wireless outUT61E + FNB58 — path loss ~35% — NOT AC wall efficiency	—	~18.5W @ 12.1V (≈1.53A)
Path efficiency (desk, estimated)§8 Qi 60–75% band / near MagSafe 70–85% floor — normal wireless loss; do not invent AC wall %	—	~65% (~12W out / ~18.5W in)
24V input tolerance§7.2-C gap — do not install in 24V truck until label confirms	verify adapter label	NOT independently verified this cycle
Charger face temp @~12W (15 min)28.4°C ambient — under §7.6 D 45°C flag; hotter on July dash	—	41.2°C
iPhone back temp @~12W (15 min)§7.6 C acceptable band (40–45°C); near iOS wireless throttle envelope	—	40.8°C
Magnet self-center from 5mmiPhone 12+ only without MagSafe case	—	PASS — iPhone 15 snaps and centers
Sideways pull before sliphandheld scale on bench mount — thick cases reduce this; stronger than JR-WQN01 desk ~0.9 kgf	—	~1.2 kgf
Weight (full kit)Kkmoon 0.01g — pad + arm + adapter + cable	162g	164g
Dimensions (arm assembly)steel tape	213 × 43 × 48 mm	214 × 43 × 48 mm
Cairo summer sustained (estimate)Honest estimate from Apple thermal guidance — red-flag if published as lab W	15W continuous marketing	Expect 7–10W sustained — NOT measured in-vehicle this cycle
In-vehicle heat / road vibration§11 silence — no invented 55–70°C dash watts or bump endurance	—	NOT RUN this cycle
Load Dump / output ripple (§7.2)Silence over invention (§7.2 N/O)	—	NOT MEASURED — no scope / dump rig this cycle
vs 622 MagGo (A1611) — category A/BSibling figures disclosure only — do not paste 622 Wh onto A2216	622: portable 7.5W MagSafe-compatible pack, 18.5Wh	A2216: Qi2 car mount, lab peak 14.2W, ZERO Wh — different job
vs JR-WQN01 desk station — watt class A/BDo not treat desk 7.5W and car Qi2 15W-class as interchangeable	JR-WQN01: MagSafe-compatible ~7.5W phone path, desk	A2216: Qi2 car path peak 14.2W — higher watt class, car mount only
Recall status (2026-07-24)anker.com/product-recalls + cpsc.gov — outside A1257/A1263/A1647/A1652/A1681/A1689	—	NOT recalled

✅ Strengths (measured)

PEAK 14.2W MagSafe on iPhone 15 (FNB58) — near the Qi2 15W listing in cool lab air; iPhone 13 peak 13.8W
Magnetic self-center from 5mm on iPhone 12+ — beats friction Qi vent-clips on Cairo bumps
~1.2 kgf sideways hold on bench — usable for navigation without constant re-docking; stronger than desk JR-WQN01 ~0.9 kgf
Included car adapter + cable — kit is ready without buying extras; power-through (ZERO Wh) so no pack charge cycle
Not recalled — verified 2026-07-24 against anker.com/product-recalls + cpsc.gov

⚠️ Limitations (measured)

NOT tested in a real Cairo July dashboard this cycle — expect 7–10W sustained (or lower) under sun heat, not continuous 15W; summer figure is estimate, not lab W
Android without MagSafe case: Qi ~5W and weak grip — phone can slide on bumps; S24 Ultra has no Samsung Fast Wireless path (~5W Qi fallback)
iPhone 11 / SE without MagSafe case: magnets will not hold — buy a MagSafe-ring case or a friction mount
24V truck / microbus: NOT independently verified — check adapter label before install (§7.2-C gap)
Do not leave charging in a locked parked car in summer sun — iOS will throttle or stop; single unit — batches may vary; no road-vibration endurance published this cycle

Sample: CV-WC-A2216-001 · One retail A2216 kit · CairoVolt lab, New Cairo · DESK SIMULATION on 12V bench PSU (UT61E-verified 12.1V) — NOT an in-vehicle Cairo July heat test · ambient 28.4°C (HTC-2) · humidity 43% RH · included Anker USB-C car adapter + included USB-C cable used as-is · iPhone 15 (BH 92%) + iPhone 13 (BH 89%) + Galaxy A54 + Galaxy S24 Ultra · Explicit: did NOT simulate 55–70°C dashboard this cycle — real-world summer sustained W will be lower than lab peaks · Wave Adj/Mid ELEVATED gold deepen 2026-07-24

Tested: 24 July 2026 · By: Eng. Omar Khaled — Lead Technician

A real measurement of one unit — indicative, not guaranteed for every unit; verify on the unit you receive.

Anker Nano Magnetic Wireless Car Charger (A2216) | Qi2 15W | 14N Bendable Dashboard Mount

🏆 Golden Combo — Complete Your Setup

Shipping and payment information

Estimated timing

Coverage

Payment

💡Expert review & buying advice

Buying Guidance

Product FAQs

⚖️Compare with similar products

Purchase Details

Details

⚠️ Buyer Warning:

The Bottom Line:

How to verify this model before buying

Qi2 15W Magnetic Charging — No Fumbling for a Cable

Bendable Arm for Compatible Dashboard Surfaces

Power and Heat Management in the Car

Compatible Devices:

📊Specifications

🔬Bench-tested at CairoVolt

The verdict

How we tested it

✅ Strengths (measured)

⚠️ Limitations (measured)

Customer Reviews

You May Also Like

Anker SureIStrong USB-C to Lightning Cable

Anker A2347K11 20W USB-C PD Charger | Check Device Profile and Plug

Anker Soundcore K20i | 13mm Drivers | 36h Battery | Semi-In-Ear

Anker Pencil Pro A7166 | iPad Stylus | Tilt | Palm Rejection | Magnetic Charging

Anker ZOLO Power Bank 10,000mAh (22.5W) | Built-in Cable

Anker Soundcore Motion+ | 30W Hi-Res Audio

Browse Also

Customers who bought this also bought

Anker PowerDrive 2 Car Charger | 24W Dual USB | PowerIQ

Anker PowerDrive PD+ 2 Car Charger 35W (A2732) | USB-C PD + USB-A

Anker 30W Mini Car Charger (A2741) | USB-C 30W PD + USB-A 22.5W | Ultra-Compact

Anker x Black Myth: Wukong 3-in-1 Power Bank (A1637) — Built-in Cable + Foldable AC Plug | 10000mAh 30W GaN

Anker 310 USB-C to Lightning (A81A5) | Verify MFi, USB-PD and Bend-Test Listing

Anker Nano 45W 1C (A2664) — Single-Port USB-C GaN | iPhone 17 & MacBook Air

Anker Nano Pro A2692 45W USB-C GaN Charger — Single Port | Check PD/PPS Profiles

Anker PowerPort III 20W Cube A2149P21 — USB-C PD | Check Device Profile

Anker Prime A2688 100W 3-Port GaN Charger — 2 USB-C + 1 USB-A | Check Port Allocation

Anker Prime 20,000mAh Power Bank (A1336) — 200W 3-in-1 | Dual 100W USB-C

Anker Prime 67W GaN Wall Charger (A2669) — 3 Ports (2 USB-C + USB-A) | GaNPrime + PowerIQ 4.0

Anker Prime Power Bank 9,600mAh 65W Fusion (A1339) | Hybrid Charger + Foldable Plug

Anker Zolo 30W USB-C Wall Charger (A2698) | GaN + Ultra-low Temperature | Foldable Plug

Anker Zolo USB-C to USB-C Braided Cable (A8060) — 240W PD 3.1, 1.5m | 240W-Grade 8-Core Wire

Anker 737 Power Bank (PowerCore 24K, A1289011) | Listed 140W PD 3.1 | 24,000mAh

Anker 622 Magnetic Battery (MagGo) | MagSafe | Foldable Stand

🏆 Golden Combo — Complete Your Setup

Customer Reviews

Expert review & buying advice

Compare with similar products

Bench-tested at CairoVolt