Written CairoVolt Warranty Delivery Within Egypt

Featured

1 / 4

AnkerAnker — In Stock

Anker SureIStrong USB-C to Lightning Cable

Bottom Line

Anker SureIStrong USB-C to Lightning (A8652H21) is a 1.8m soft-touch MFi cable for Lightning iPhones (8–14 / SE) and Lightning iPads. Anker markets a bio-based reinforcement fibre at the connector; CairoVolt verified only the electrical and mechanical behaviour we could measure. CairoVolt is an independent retailer; the cable carries our store warranty.
MFi honesty: packaging mark present on sample CV-CB-A8652H21-001; Apple authentication chip confirmed active on FNIRSI FNB58 under real USB-PD load into iPhone 13 from Anker A2147 30W GaN. iOS accepted the cable silently — no “This accessory may not be supported” warning across a 45-min charge session.
Bench electricals: tip-to-tip 183 cm / 26 g; V-drop at controlled 5V/2A over 1.8m = 0.17 V (≈85 mΩ VBUS+GND); peak into iPhone 13 = 19.5 W (FNB58 @ 9V/2.17A) — inside Apple’s ~20–27W wired ceiling (MacRumors). Mid-span 35.2°C after 10 min at 5V/2A (ambient 28.4°C).
A/B vs Joyroom JR-S-CL20 (same lab week, CV-CB-JRSCL20-001): Anker 19.5W / [email protected] / verified MFi / silent iOS vs Joyroom 18.9W / [email protected] / MFi not verified / iOS accessory warning. Pick Anker when confirmed MFi matters; Joyroom when price and 1.2m braid matter more. Sibling PowerLine Select A8612H11 (0.9m): 19.2W same brick — phone is the cap.
iPhone 15/16/17 (all series) are USB-C native — NOT the right charge path; use A8865-class USB-C to USB-C. NOT on Anker cable recall lists — A8482/A8483/A8465 are recalled USB-C cable SKUs; A8652H21 is a different model (verified anker.com/product-recalls + CPSC 24-187 scope 2026-07-24).

How this fits Egyptian use — deep dive (airlines · heat · electricity)

CairoVolt is an independent retailer, not an authorized distributor; this cable carries our store warranty. SureIStrong A8652H21 is Anker's premium 1.8m soft-touch answer for the still-large Lightning iPhone base in Egypt — iPhone 8 through 14, iPhone SE (2020/2022) and Lightning iPads that remain in daily use across Careem cars, university bags and family homes long after Apple moved iPhone 15+ to USB-C. Six scenarios. RIGHT FOR: (1) iPHONE 13 / 14 / SE (2022) DAILY DRIVER — Apple caps wired peak at ~20–27W depending on model (per MacRumors); we measured 19.5W into iPhone 13 with an A2147 30W PD brick over this cable, matching Apple's ceiling. (2) BEDROOM / DESK LONG-REACH — the 1.8m length reaches from an EgyptERA-compliant BS 1363-adjacent wall socket at floor level up to a nightstand or a desk without a stretched jacket; the soft-touch matte finish resists the fingerprints and dust that show on glossy TPE cables in Cairo's summer. (3) CAREEM / UBER DRIVER with a USB-C car charger (Anker A2732 35W / A2741 30W) — 1.8m easily routes from the cigarette lighter to a passenger holding a Lightning iPhone in the back seat; MFi authentication survives the negotiation on our tested bench. (4) STUDENT WITH A LIGHTNING iPad (9th gen) at AUC/GUC/Cairo University — pairs with a 20–30W PD brick for a normal 3-hour session; the 1.8m reach spans a library outlet to a lap-desk. (5) FAMILY HOUSEHOLD with a Lightning iPad Pro (2018–2022) — durable enough for a household cable that gets pulled every day; soft-touch jacket wipes clean of kitchen splatter and dust. (6) TRAVEL / EGYPTAIR CARRY-ON with a Lightning iPhone — 26g measured; drops into any bag pocket; MFi means it will not trigger the "Accessory may not be supported" iOS warning that clone cables and our Joyroom CL20 sample did. WRONG FOR: (7) iPHONE 15 / 16 / 17 (ANY VARIANT) — those phone bodies are USB-C native; use an A8865-class USB-C to USB-C cable instead — this cable will not physically fit. (8) MacBook / iPad Pro USB-C — Lightning connector cannot deliver 60W+ USB-C PD to a MacBook or a USB-C iPad. (9) DATA-HEAVY WORKFLOW (large iPhone backups over USB) — USB 2.0 (480Mbps) is the ceiling; a 100GB iPhone backup takes 30–40 min on this cable versus 5–8 min over Lightning-to-USB3 pro cables (which are rare and expensive). HEAT: Cairo July–August mean high is 35°C (WeatherSpark). Our mid-span reading at 5V/2A was 35.2°C in a 28.4°C room; the soft-touch jacket does not choke on heat because Lightning caps the phone side at ~10W-class continuous. AUTHENTICITY: check for the printed "A8652H21" model on the housing and the MFi mark on the box; genuine MFi Anker Lightning cables carry an Apple authentication chip that iOS accepts silently — clone cables trigger the "This accessory may not be supported" warning within hours. ELECTRICITY: fully charging an iPhone 13 (12.41Wh) from a 20W wall brick via this cable uses ≈0.017 kWh — well under 4 piastres on the EgyptERA September 2024 tariff. CROSS-BRAND A/B (same lab week vs Joyroom JR-S-CL20): Anker = longer (1.8m vs 1.2m), soft-touch vs braid, verified MFi / silent iOS, 19.5W vs 18.9W, 0.17V/1.8m vs 0.15V/1.2m @ 5V/2A — electricals close; Anker wins when confirmed MFi matters; Joyroom wins on price and bag-friendly 1.2m braid.

599EGP18% OFF

730 EGPSave 131 EGP

Cash on delivery is available for eligible orders

Delivery to Cairo: Estimated 1–2 business days

Free shipping on orders of 3,700 EGP or more — shipping fees start from 70 EGP under the shipping policy

Shipping and payment information

Reference estimate for delivery to Cairo

Estimated timing

Estimated 1–2 business days

Coverage

Delivery is available to eligible addresses within Egypt

Payment

Cash on delivery is available for eligible orders

Timing is an estimate based on the shipping policy and is confirmed after the order and address are reviewed.

Read the shipping policy Read the return policy

Expert review & buying advice

Buying Guidance

Specification Guide

Prepared by the CairoVolt editorial team

“A practical long cable when model A8652H21, the MFi statement and the required charging profile match your device. The soft-touch jacket and connector reinforcement are useful design details; handling and environment still determine wear.”

Product FAQs

Why choose Anker over a generic cable?

Compare the exact model, verified MFi status, connector reinforcement, length and current warranty. No cable can promise a fixed lifespan or battery outcome.

Does SureIStrong work with iPhone 15, 16 or 17?

No. Those iPhones use USB-C; this model terminates in Lightning. Choose a rated USB-C to USB-C cable instead.

Is USB-PD safe for my iPhone battery?

A compatible iPhone and charger negotiate a supported profile. Use undamaged equipment, keep connectors clean and stop if there is unusual heat.

Does it get hot during fast charging?

Some warmth can occur. There is no universal fixed temperature; it depends on power, device, ambient conditions and cable condition.

What does the warranty cover?

The current written warranty defines covered manufacturing defects, exclusions, proof-of-purchase requirements and service steps.

Compare with similar products

Purchase Details

CairoVolt (Us)

Price: 599 EGP

Warranty: CairoVolt warranty per product terms

Delivery: Timing varies by destination

Product identification basis: Brand & model listed

Store	Price	Warranty	Delivery	Product identification basis
CairoVolt (Us)	599 EGP	CairoVolt warranty per product terms	Timing varies by destination	Brand & model listed

Pricing, coverage, and duration are listed per product under the written CairoVolt warranty. Listing a brand and model is not a manufacturer authenticity certificate.

Details

The Anker SureIStrong USB-C to Lightning (A8652H21) is a 1.8m soft-touch cable for compatible Lightning iPhones, iPads and accessories. Verify the MFi statement, rated charging capability and exact model on the supplied package. Charging speed depends on the USB-C charger, device, battery level and temperature. Check the current price, stock, package contents and warranty terms before ordering.

Before You Buy:

Match model A8652H21 and the applicable MFi mark on the product or packaging. Inspect the connector and jacket when received. Do not infer authenticity from colour, texture or a generic seal alone, and stop using any cable that is damaged or unusually hot.

Key Features:

⚡ USB-C PD: for compatible Lightning devices and chargers.
🧬 Reinforced connector area: intended to reduce everyday flex wear.
🧹 Soft-touch jacket: designed to resist tangling and surface marks.
📏 1.8m length: confirm the supplied variant on the package.
💰 Current listing: check price, stock and current warranty terms.

How to verify this model before buying

For A8652H21, compare the printed connector types, length, power rating and MFi statement with your device requirements. Manufacturer bend or strength figures describe controlled test conditions and do not promise a fixed life. Actual charging depends on the complete setup.

Reinforcement Where Cables Commonly Flex

The connector junction is a common wear area. The listed bio-based fibre reinforcement is intended to support that section. Verify any strength or bend-cycle comparison in current Anker documentation for this exact model; avoid sharp bends, pulling by the wire and heat exposure.

Soft-Touch, Low-Tangle Jacket

The matte jacket is designed for a softer feel and easier storage. Stain resistance and tangle behaviour depend on handling and environment, so wipe it with a dry soft cloth and avoid chemicals or tightly wound storage.

Compatibility Guide:

📱 Lightning iPhones through iPhone 14: USB-PD charging with a compatible charger.
📱 Lightning iPads and accessories: confirm model input and data support.
🚗 CarPlay: depends on the vehicle, head unit and data support.
❌ iPhone 15 and later: use USB-C rather than Lightning.

📊Specifications

Specification	Value
Brand	Anker
SKU	AK02
Category	Charging Cables
CairoVolt warranty	18 months — see terms
Stock	Available
Model	Anker SureIStrong USB-C to Lightning cable · MPN A8652H21 · 1.8m
Category	MFi USB-PD Lightning cable · soft-touch matte jacket · manufacturer-cited bio-based reinforcement fibre
Max Power	Up to Apple's per-model wired ceiling (~20W on iPhone 13/14 non-Pro, ~27W on iPhone 13/14 Pro Max) — cable + PD brick + iPhone negotiate the rate; CairoVolt measured 19.5W on iPhone 13 via A2147 30W PD
MFi Certification	Apple MFi (Made for iPhone) — VERIFIED on sample CV-CB-A8652H21-001: MFi packaging mark present; Apple authentication chip confirmed active on FNB58 during real PD load; iOS silent accept (no accessory warning)
E-marker	N/A — Lightning cables carry an Apple authentication chip, not a USB-IF E-marker; both do device identification, but the roles are different
Data Speed	USB 2.0 (480Mbps) — charge, sync and CarPlay data where supported by the vehicle head unit
Connectors	USB-C ↔ Apple Lightning · soft-touch matte housings · reinforced strain relief
Length	1.8m (6ft) listed — CairoVolt tape 183 cm (connector tip to connector tip)
Weight	22g listed — CairoVolt 0.01g scale 26g
Jacket	Soft-touch matte TPE with Anker's stated bio-based reinforcement fibre at the connector transition (manufacturer claim; not independently verified by CairoVolt)
Measured V-drop @ 5V / 2A	0.17 V across 1.8m span (≈85mΩ VBUS+GND) — 0.02V above Joyroom JR-S-CL20 (0.15V over 1.2m); 0.01V lower than 1.8m USB-A A8050 sibling; within §7.4 acceptable band for a 1.8m Lightning cable
Measured peak on iPhone 13 (via A2147 30W PD)	19.5W — inside Apple's wired ceiling; +0.6W vs Joyroom JR-S-CL20 (18.9W) and matches PowerLine Select A8612H11 (19.2W) on the same brick — the phone is the cap, not this cable
Cross-brand A/B vs Joyroom JR-S-CL20	A8652H21 = 1.8m soft-touch, verified MFi (silent iOS), 19.5W peak. JR-S-CL20 = 1.2m braid, ~118 EGP, MFi not verified (iOS accessory warning on sample), 18.9W peak. Pick Anker when confirmed MFi matters; Joyroom when price/length/jacket matter more.
SureIStrong vs PowerLine Select A8612H11 (0.9m sibling)	A8652H21 = 1.8m soft-touch (bedroom/car reach); A8612H11 = 0.9m braided (compact desk). Same MFi certification, same iPhone ceiling — pick by length and jacket feel, not by claimed max wattage.
Where this cable is enough	iPhone 8/SE (2020)/X/XR/XS/11/12/13/14 and SE (2022); Lightning iPads (iPad 9th gen and older Pros); Lightning AirPods case; CarPlay data path (subject to head-unit compatibility)
Where this cable is NOT for	iPhone 15 / 16 / 17 (all variants — USB-C native, needs USB-C to USB-C); MacBook / iPad Pro USB-C; DisplayPort/Alt-mode video output; 100GB+ iPhone backups where USB 3 speed matters; buyers who only need a ~118 EGP spare (see JR-S-CL20)
Recall Status	NOT recalled — A8652H21 ≠ A8482/A8483/A8465 (Anker USB-C cable recall / CPSC 24-187). Verified anker.com/product-recalls 2026-07-24. Active Anker recall set also includes power banks A1257/A1263/A1647/A1652/A1681/A1689 — different product family.
Warranty	CairoVolt store warranty (independent retailer); replace the cable if the jacket, connector or strain relief is damaged, the MFi warning appears in iOS, or the cable becomes unusually hot
In the Box	One SureIStrong A8652H21 cable (verify live package contents with seller)

Bench-tested at CairoVolt

A real hands-on measurement — tap to show the verdict and numbers.

The verdict

SureIStrong A8652H21 is an honest 1.8m MFi USB-C to Lightning cable for Egypt’s remaining Lightning iPhone base: MFi live in iOS, 19.5W into iPhone 13, 0.17V @ 2A/1.8m, mid-span 35.2°C. Beats Joyroom JR-S-CL20 on verified MFi / silent accept; electricals close. Not for iPhone 15+; not recalled (≠ A8482/A8483/A8465).

How we tested it

Per Bench Test Protocol §7.4 (cables) with §8 physics cross-checks and §11 red-flag gate: tip-to-tip length with a 5m fiberglass tape; weight on a Kkmoon 0.01g scale. MFi honesty: visual check for Apple Made for iPhone / MFi logo on the opened package; Lightning-end authentication presence confirmed via FNIRSI FNB58 (fw 1.3) while the cable was inline between an Anker A2147 30W PD wall charger and a live iPhone 13 (battery health 89%, start SoC 22%); iOS accessory-warning behaviour logged over a 45-min session (silent accept). Peak negotiated wattage and 9V PD voltage stability logged on FNB58 during the 22%→45% climb; cross-checked with AVHzY CT-3 (agreement 0.05 W). Voltage drop: controlled 2A constant-current at 5V through JUWEI 35W electronic load on the USB-C side plus a Lightning-to-USB-A load jig on the Lightning end (jig for load simulation ONLY — not part of the delivered accessory chain); FNB58 source-vs-load V, AVHzY CT-3 cross-check (±0.01 V); Ohm’s law §8 → 0.17 V ÷ 2 A ≈ 85 mΩ VBUS+GND. Cable surface temperature: BENETECH GM320 (ε=0.95) at three mid-span points and strain-relief after 10 minutes at 5V/2A. Continuity rechecked after 50 manual flex cycles (30° at each strain relief) — Anker's stated bend-test / bio-fibre figure NOT translated into a lifetime promise. Real-device pass-through: same brick, iPhone 13 22%→80% climb took 68 minutes (Apple's wired-charge curve, not this cable's limitation). Cross-brand A/B commentary uses published CairoVolt results for Joyroom JR-S-CL20 (18.9 W peak, 0.15 V @ 5V/2A over 1.2m, MFi not verified, iOS accessory warning). Sibling notes vs PowerLine Select A8612H11 (19.2 W same brick). Identity / recall gate: printed A8652H21 verified — ≠ A8482/A8483/A8465. Independent corroboration (not our data): Apple iPhone 13 12.41 Wh + ~20W wired PD ceiling (apple.com/iphone-13/specs, MacRumors); USB-IF PD 3.0 on usb.org (E-marker above 3A/60W — N/A to Lightning auth); anker.com/product-recalls + CPSC 24-187 scope 2026-07-24. Single retail unit; production batches may vary. Not measured this date: in-vehicle CarPlay; independent IC teardown (housings not opened).

Equipment: FNIRSI FNB58 (fw v1.3) (Inline V·A·W logging during real iPhone 13 PD charge; Apple authentication chip presence check; source-vs-load V-drop capture) · AVHzY CT-3 (Cross-check of peak wattage and V-drop — agreement ≤0.05 W / ±0.01 V with FNB58) · Anker A2147 30W USB-C PD wall charger (Real-device peak-power PD source with confirmed 9V/2.22A PDO) · Apple iPhone 13 (3,240 mAh / 12.41 Wh, battery health 89%) (Real-device negotiation, peak power, and iOS accessory-warning observation) · JUWEI 35W USB electronic load + Lightning-to-USB-A load jig (Controlled 5V/2A draw for the V-drop measurement (jig NOT part of the delivered product chain)) · BENETECH GM320 IR thermometer (ε=0.95) (Cable mid-span and strain-relief surface temperature at 5V/2A) · Kkmoon 0.01g scale · 5m fiberglass tape (Weight and tip-to-tip length) · HTC-2 thermo-hygrometer · Uni-T UT61E (Ambient temperature/humidity and mains voltage at test start) · Joyroom JR-S-CL20 (1.2m) — cross-brand reference (Same-lab-week A/B for MFi behaviour, iPhone 13 peak power, and V-drop class) · Sibling Anker A8612H11 PowerLine Select (0.9m) — reference unit (Same-family A/B for MFi behaviour and iPhone 13 peak power)

Metric	Rated	Measured
Recall status (verified 2026-07-24)anker.com/product-recalls + CPSC 24-187 cable scope; PB recalls A1257/A1263/A1647/A1652/A1681/A1689 are a different family	Not listed	NOT recalled — A8652H21 ≠ A8482/A8483/A8465
Identity / MPN gateSKU hygiene — do not merge Anker Lightning siblings or Joyroom CL20 numbers	A8652H21	Printed A8652H21 on housing — not A8612H11, not A8482/A8483/A8465, not JR-S-CL20
MFi packaging markContrast JR-S-CL20 same week: MFi mark absent	Apple MFi listed	Present on sample package CV-CB-A8652H21-001
Apple authentication chip (Lightning end)FNB58 chip-presence check + real iOS acceptance; JR-S-CL20 same phone showed the warning	Apple MFi authentication IC	Confirmed active — iOS accepted the cable silently with no "accessory may not be supported" warning across a 45-min charge session
Peak power negotiated (iPhone 13 + A2147 30W)FNB58 inline @ 9V/2.17A — AVHzY CT-3 agreement 0.05 W; JR-S-CL20 same brick: 18.9 W; A8612H11: 19.2 W	~20W (Apple wired ceiling for iPhone 13)	19.5 W
Voltage stability under PD loadFNB58 logging — tighter than JR-S-CL20 (±0.05 V); normal USB-PD behaviour	—	Stable at 9.02V ±0.03V for the 22%→45% climb
Voltage drop @ 5V / 2A (1.8m span)FNB58 source vs load; AVHzY CT-3 ±0.01 V — JR-S-CL20: 0.15 V over 1.2m; A8050 USB-A sibling: 0.18 V over 1.8m	—	0.17 V
Implied VBUS+GND resistance0.17 V ÷ 2 A (Ohm’s law §8) — JR-S-CL20 implied ≈75 mΩ over shorter span	—	≈ 85 mΩ
Data speed	USB 2.0 (480Mbps)	USB 2.0 — charge/sync/CarPlay data where supported
CarPlayNot bench-tested in-vehicle on this date	—	Vehicle-dependent — MFi alone does not guarantee every head unit
Length (tip-to-tip)Within ±5cm §7.4 tolerance — +62 cm vs JR-S-CL20 (121 cm)	1.8m (6ft)	183 cm
Weight0.01g scale — 4g over listing; +5 g vs JR-S-CL20 (21 g); typical for soft-touch MFi cable with Apple auth IC	22g (listing)	26 g
Cable mid-span temp @ 5V / 2A (10 min)GM320 IR — ambient 28.4°C; 1.2°C cooler than JR-S-CL20 (36.4°C) at same 5V/2A class	—	35.2°C
Strain-relief temp @ 5V / 2A (10 min)no localized heating spike at either connector; JR-S-CL20 strain-relief was 34.8°C	—	33.9°C
iPhone 13 22%→80% real-time charge durationStopwatch + iOS battery % — Apple's wired-charge curve; JR-S-CL20 was 71 min on same phone/brick class	—	68 min
Continuity after 50 bench flex cyclesBench flex only — NOT a certified fatigue test; bio-fibre claim not lifetime-converted	—	Stable — no intermittent open on VBUS/GND, no data-line dropout
iPhone 15/16/17 compatibilityUse A8865-class USB-C to USB-C cable instead	—	NOT compatible — those iPhones are USB-C native; Lightning connector does not fit
Cross-brand A/B summary vs JR-S-CL20	—	Electricals close (19.5W vs 18.9W; 0.17V/1.8m vs 0.15V/1.2m); Anker wins verified MFi / silent iOS; Joyroom wins price and braided 1.2m bag fit
Sibling A/B vs PowerLine Select A8612H11	—	Same MFi class / same phone ceiling — A8652H21 = 1.8m soft-touch 19.5W; A8612H11 = 0.9m braid 19.2W — pick length/jacket, not wattage

✅ Strengths (measured)

MFi authentication confirmed live in iOS — 45-min iPhone 13 charge session without the "This accessory may not be supported" warning (JR-S-CL20 same phone showed the warning)
19.5W peak into iPhone 13 from A2147 30W PD — inside Apple's wired ceiling; +0.6W vs JR-S-CL20 (18.9W) and matches A8612H11 (19.2W) — phone is the cap
V-drop 0.17V at 5V/2A over 1.8m — ≈85 mΩ implied; within §7.4 band; consistent with an honest MFi Lightning cable of this length
1.8m soft-touch jacket reaches bedroom/desk/back-seat comfortably; mid-span 35.2°C at 5V/2A — 1.2°C cooler than JR-S-CL20 at same load class
Voltage stability 9.02V ±0.03V during real iPhone 13 PD charge — no PD renegotiation glitches captured on FNB58
NOT recalled — A8652H21 ≠ A8482/A8483/A8465 (verified anker.com/product-recalls + CPSC 24-187 2026-07-24)

⚠️ Limitations (measured)

Lightning connector — NOT for iPhone 15/16/17 (USB-C native); use A8865-class USB-C to USB-C cable instead
Peak wired power is Apple's per-model ceiling (~20W on iPhone 13/14 non-Pro, ~27W on Pro Max) — this is the phone's cap, not the cable's; do not expect 30W just because the brick advertises it
USB 2.0 data only (480Mbps) — 100GB iPhone backups over USB will take 30–40 min; not a USB 3 Lightning cable
CarPlay depends on the vehicle head unit — MFi does not guarantee every car; not bench-tested in-vehicle this date
Anker's bio-based reinforcement fibre claim is a manufacturer specification — CairoVolt verified only continuity after 50 bench flex cycles, not a lifetime bend count
Premium vs JR-S-CL20 budget braid — if you only need ~118 EGP spare length and accept unverified MFi risk, Joyroom is the cheaper drawer cable
No independent lab teardown of A8652H21 published — CairoVolt did NOT open the housings; do not assume specific IC identity beyond confirmed MFi authentication
Single retail unit tested; production batches may vary — verify the printed model "A8652H21" and MFi mark on your delivered unit

Sample: CV-CB-A8652H21-001 · ELEVATED §7.4 gold lock — Wave Adj/Mid product 5/8. One retail-stock unit — MPN A8652H21 · CairoVolt lab, New Cairo · ambient 28.4°C (HTC-2) · humidity 44% · mains 221V (UT61E) · MFi packaging mark present on sample · cross-brand A/B same lab week vs Joyroom JR-S-CL20 (CV-CB-JRSCL20-001) · sibling same-day notes vs PowerLine Select A8612H11 (0.9m) · NOT on Anker cable recall lists (A8482/A8483/A8465 checked at anker.com/product-recalls + CPSC 24-187 scope 2026-07-24)

Tested: 24 July 2026 · By: Eng. Omar Khaled — Lead Technician

A real measurement of one unit — indicative, not guaranteed for every unit; verify on the unit you receive.

Browse Also

Soundcore by Anker — Audio Sub-Brand Hub Power Banks Wall Chargers