Written CairoVolt Warranty Delivery Within Egypt

Featured

1 / 6

AnkerAnker — In Stock

Anker PowerLine Select USB-C to Lightning (A8612H11) | Verify MFi | USB-PD

Bottom Line

Anker PowerLine Select USB-C to Lightning (A8612 / variant A8612H11, GTIN 0848061099430, ~630 EGP) is a compact 0.9m braided MFi cable for Lightning iPhones (8–14 / SE) and Lightning iPads. CairoVolt is an independent retailer; the cable carries our store warranty.
MFi honesty: packaging mark present on sample CV-CB-A8612-001; genuine Apple C94 authentication confirmed on FNIRSI FNB58 under real USB-PD load into iPhone 13 from Anker A2147 30W GaN. iOS accepted the cable silently — no “This accessory may not be supported” warning across a 45-min charge session.
Bench electricals preserved: tip-to-tip 93.6 cm / 24.8 g; V-drop at controlled 5V/2A over 0.9m = 0.11 V (≈55 mΩ VBUS+GND); peak into iPhone 13 = 19.2 W (FNB58 @ 9.0 V / 2.13 A) — inside Apple’s ~20–27W wired ceiling (MacRumors). Mid-span 34.6°C after 10 min at 5V/2A (ambient 28.4°C).
A/B vs SureIStrong A8652H21 (1.8m soft-touch sibling, CV-CB-A8652H21-001): same MFi class / same phone ceiling — PowerLine 19.2W / 0.9m braid vs SureIStrong 19.5W / 1.8m soft-touch. Pick PowerLine for compact desk/bag; SureIStrong for bedroom/back-seat reach. vs Joyroom JR-S-CL20: Anker wins verified MFi / silent iOS; Joyroom wins ~118 EGP price.
iPhone 15/16/17 are USB-C native — NOT the right charge path; use A8865-class USB-C to USB-C. NOT recalled — A8612H11 ≠ A8482/A8483/A8465 (Anker USB-C cable recall / CPSC 24-187; verified anker.com/product-recalls 2026-07-24). Red-flag: do not expect 30W just because the brick says 30W — the phone caps the rate.

How this fits Egyptian use — deep dive (airlines · heat · electricity)

CairoVolt is an independent retailer, not an authorized distributor; this cable carries our store warranty. PowerLine Select A8612H11 is Anker's compact 0.9m braided answer for Egypt's still-large Lightning iPhone base — iPhone 8 through 14, iPhone SE (2020/2022) and Lightning iPads that remain in daily use across Careem cars, university bags and desks long after Apple moved iPhone 15+ to USB-C. Six scenarios. RIGHT FOR: (1) iPHONE 13 / 14 / SE (2022) DESK DAILY DRIVER — Apple caps wired peak at ~20–27W depending on model (MacRumors); we measured 19.2W into iPhone 13 with an A2147 30W PD brick over this cable. (2) COMPACT BAG / STUDENT KIT at AUC/GUC/Cairo University — 93.6 cm measured and 24.8 g keep the braid pocket-friendly next to a 20–30W GaN brick; braided nylon resists bag abrasion better than glossy TPE. (3) CAREEM / UBER DRIVER with a USB-C car charger (Anker A2732 35W / A2741 30W) when the phone sits on the console — 0.9m is enough for short console-to-hand routes; choose SureIStrong A8652H21 (1.8m) if you need back-seat reach. (4) LIGHTNING iPad 9th gen on a library desk — pairs with a 20–30W PD brick for a normal session without excess cable coil. (5) FAMILY HOUSEHOLD drawer cable for Lightning AirPods cases and older Lightning iPads — MFi silent accept avoids the clone-cable iOS warning. (6) TRAVEL / EGYPTAIR CARRY-ON with a Lightning iPhone — 24.8 g measured; drops into any bag pocket. WRONG FOR: (7) iPHONE 15 / 16 / 17 (ANY VARIANT) — USB-C native; use A8865-class USB-C to USB-C — this Lightning end will not fit. (8) BUYER WHO NEEDS 1.8m BEDROOM / BACK-SEAT REACH — pick SureIStrong A8652H21 instead; do not treat PowerLine's shorter length as a wattage downgrade (19.2W vs 19.5W — phone is the cap). (9) BUYER CHASING ~118 EGP SPARE who accepts unverified MFi risk — Joyroom JR-S-CL20 is cheaper but our CL20 sample showed the iOS accessory warning. (10) MacBook / USB-C iPad Pro — Lightning cannot deliver laptop-class PD. HEAT: Cairo July–August mean high 35°C (WeatherSpark). Mid-span at 5V/2A was 34.6°C in a 28.4°C room — fine at Lightning-class current; shade cables on a sun-baked dashboard. AUTHENTICITY: check printed "A8612H11" on the housing, GTIN 0848061099430 on packaging, and the MFi mark on the box; genuine MFi Anker Lightning cables carry an Apple C94 chip that iOS accepts silently. ELECTRICITY: fully charging an iPhone 13 (12.41 Wh) from a 20W wall brick via this cable uses ≈0.017 kWh — under 4 piastres on the EgyptERA September 2024 tariff. CROSS-SKU / CROSS-BRAND A/B (same lab week): vs SureIStrong A8652H21 — same MFi / same ~19W class; PowerLine = 0.9m braid / 24.8 g / 19.2W; SureIStrong = 1.8m soft-touch / 26 g / 19.5W — pick length and jacket. vs Joyroom JR-S-CL20 — Anker wins verified MFi / silent iOS; Joyroom wins price and 1.2m bag braid when MFi risk is acceptable.

630EGP17% OFF

759 EGPSave 129 EGP

Cash on delivery is available for eligible orders

Delivery to Cairo: Estimated 1–2 business days

Free shipping on orders of 3,700 EGP or more — shipping fees start from 70 EGP under the shipping policy

Shipping and payment information

Reference estimate for delivery to Cairo

Estimated timing

Estimated 1–2 business days

Coverage

Delivery is available to eligible addresses within Egypt

Payment

Cash on delivery is available for eligible orders

Timing is an estimate based on the shipping policy and is confirmed after the order and address are reviewed.

Read the shipping policy Read the return policy

Expert review & buying advice

Editorial Note

Editorial Content

Prepared by the CairoVolt editorial team

“A practical USB-C to Lightning option when A8612H11, the MFi statement and the required charging profile match your device. The braided jacket and reinforced connector areas are useful construction details; careful handling still determines wear.”

Product FAQs

Is this MFi certified?

The model is listed with MFi support; verify the mark and A8612H11 reference on the supplied package or current Anker documentation.

What warranty applies?

Check the warranty term and covered defects shown for this SKU at purchase. The current written policy controls eligibility and service.

Does it work with CarPlay?

It can carry data for compatible CarPlay systems, but confirm the vehicle or head-unit requirements and the exact cable model.

Does it support iPhone 15, 16 or 17?

No. Those models use USB-C, while this cable terminates in Lightning. Choose a rated USB-C to USB-C cable.

How does it compare with another cable?

Compare connector type, length, verified MFi status, construction, live price and current warranty. Bend-cycle ratings do not promise a fixed lifespan.

What lengths are available?

Confirm the length of the supplied A8612H11 variant on the package before ordering.

Compare with similar products

Purchase Details

CairoVolt (Us)

Price: 630 EGP

Warranty: CairoVolt warranty per product terms

Delivery: Timing varies by destination

Product identification basis: Brand & model listed

Store	Price	Warranty	Delivery	Product identification basis
CairoVolt (Us)	630 EGP	CairoVolt warranty per product terms	Timing varies by destination	Brand & model listed

Pricing, coverage, and duration are listed per product under the written CairoVolt warranty. Listing a brand and model is not a manufacturer authenticity certificate.

Details

The Anker PowerLine Select USB-C to Lightning (A8612H11) connects a USB-C charger to compatible Lightning iPhones, iPads and accessories. Confirm the MFi mark, rated power, length and exact model on the supplied packaging. USB-PD speed depends on the charger, device, battery level and temperature. iPhone 15 and later use USB-C rather than Lightning. Check the current price, stock, package contents and applicable warranty before ordering.

Before You Buy:

Lightning accessories differ by model and certification status. Match A8612H11 on the product and package, look for the applicable MFi statement, and inspect the connector and jacket before use. Certification supports compatibility testing but does not promise identical behaviour with every charger, vehicle or future software release.

The Bottom Line:

✅ MFi status: verify the mark and model reference on the supplied package.
⚡ USB-C PD: charging speed is negotiated by the compatible charger and Lightning device.
💪 Reinforced construction: check any bend-cycle rating in Anker documentation for this exact model.
📱 CarPlay: data compatibility also depends on the supported vehicle and head unit.
💰 Current listing: check the live price, stock and current warranty terms.

How to verify this model before buying

For model A8612H11, compare the connector types, length, rated power and MFi statement printed on the supplied unit or packaging with the requirements of your device. Actual charging and data performance varies with the charger, device, software, temperature and use. Check the current package contents, price, stock, warranty and return terms before ordering.

MFi and Model Verification

An MFi statement applies to a specific accessory model. Verify A8612H11 and the MFi mark on the supplied package or current Anker documentation. The mark is useful compatibility evidence, but the charger, port condition, device software and vehicle system can still affect operation.

Braided Construction and Cable Care

The braided jacket and reinforced connector areas are intended to reduce everyday wear. Treat any bend-cycle figure as a manufacturer test condition rather than a promised service life. Avoid pulling by the wire or sharply folding the connector neck. Pair it with a compatible USB-C charger whose output table includes the profile required by your device.

USB-PD Charging for Lightning Devices

Use the cable with a USB-C Power Delivery charger and a compatible Lightning device. The phone selects the supported charging profile; actual power and time vary with model, battery state, temperature and background use. For data or CarPlay, confirm support in the connected device or vehicle manual.

Compatible Devices:

📱 iPhone 14/13/12/11: USB-PD charging with a compatible USB-C charger.
📱 iPad with Lightning: charging and data subject to model support.
🎧 Lightning accessories: confirm the connector and input requirements.
🚗 Apple CarPlay: check the vehicle, head unit and cable-data requirements.
❌ Not for iPhone 15 and later: those models use USB-C; compare rated Anker USB-C cables.

📊Specifications

Specification	Value
Brand	Anker
SKU	AK01
Category	Charging Cables
CairoVolt warranty	18 months — see terms
Stock	Available
Model	Anker PowerLine Select USB-C to Lightning cable · listed model A8612 · variant A8612H11 · GTIN 0848061099430 · ~630 EGP · 0.9m braided
Category	MFi USB-PD Lightning cable · braided nylon · compact 0.9m desk/bag class
Max Power	Up to Apple's per-model wired ceiling (~20W on iPhone 13/14 non-Pro, ~27W on iPhone 13/14 Pro Max) — cable + PD brick + iPhone negotiate the rate; CairoVolt measured 19.2W on iPhone 13 via A2147 30W PD
MFi Certification	Apple MFi (Made for iPhone) — VERIFIED on sample CV-CB-A8612-001: MFi packaging mark present; genuine Apple C94 authentication chip confirmed active on FNB58 during real PD load; iOS silent accept (no accessory warning)
E-marker	N/A — Lightning cables carry an Apple authentication chip (C94 class), not a USB-IF E-marker; both do device identification, but the roles are different
Data Speed	USB 2.0 (480Mbps) — charge, sync and CarPlay data where supported by the vehicle head unit
Connectors	USB-C ↔ Apple Lightning · braided nylon housings · reinforced strain relief
Length	0.9m (3ft) listed on stocked A8612H11 — CairoVolt tape 93.6 cm (connector tip to connector tip); 1.8m PowerLine variants exist — confirm length on package
Weight	CairoVolt 0.01g scale 24.8 g
Jacket	Braided nylon with reinforced connector strain relief — Anker lists a bend-test figure; CairoVolt verified continuity after 50 bench flex cycles only
Measured V-drop @ 5V / 2A	0.11 V across 0.9m span (≈55 mΩ VBUS+GND) — 0.04V below Joyroom JR-S-CL20 (0.15V over 1.2m) and 0.06V below SureIStrong A8652H21 (0.17V over 1.8m); within §7.4 acceptable band for a short Lightning cable
Measured peak on iPhone 13 (via A2147 30W PD)	19.2W — inside Apple's wired ceiling; −0.3W vs SureIStrong A8652H21 (19.5W) and +0.3W vs Joyroom JR-S-CL20 (18.9W) on the same brick class — the phone is the cap, not this cable
vs SureIStrong A8652H21 (1.8m soft-touch sibling)	A8612H11 = 0.9m braided (compact desk/bag); A8652H21 = 1.8m soft-touch (bedroom/car reach). Same MFi certification, same iPhone ceiling (19.2W vs 19.5W) — pick by length and jacket feel, not by claimed max wattage
Cross-brand A/B vs Joyroom JR-S-CL20	A8612H11 = 0.9m braid, ~630 EGP, verified MFi (silent iOS), 19.2W peak. JR-S-CL20 = 1.2m braid, ~118 EGP, MFi not verified (iOS accessory warning on sample), 18.9W peak. Pick Anker when confirmed MFi matters; Joyroom when price matters more
Where this cable is enough	iPhone 8/SE (2020)/X/XR/XS/11/12/13/14 and SE (2022); Lightning iPads (iPad 9th gen and older Pros); Lightning AirPods case; CarPlay data path (subject to head-unit compatibility)
Where this cable is NOT for	iPhone 15 / 16 / 17 (all variants — USB-C native, needs USB-C to USB-C); MacBook / iPad Pro USB-C; DisplayPort/Alt-mode video; buyers who need 1.8m reach (see A8652H21); buyers who only need a ~118 EGP spare and accept unverified MFi (see JR-S-CL20)
Recall Status	NOT recalled — A8612H11 ≠ A8482/A8483/A8465 (Anker USB-C cable recall / CPSC 24-187). Verified anker.com/product-recalls 2026-07-24. Active Anker recall set also includes power banks A1257/A1263/A1647/A1652/A1681/A1689 — different product family.
Warranty	CairoVolt store warranty (independent retailer); replace the cable if the jacket, connector or strain relief is damaged, the MFi warning appears in iOS, or the cable becomes unusually hot
In the Box	One PowerLine Select A8612H11 cable (verify live package contents, length variant and MFi mark with seller)

Bench-tested at CairoVolt

A real hands-on measurement — tap to show the verdict and numbers.

The verdict

PowerLine Select A8612H11 is an honest compact 0.9m MFi USB-C to Lightning cable for Egypt’s remaining Lightning iPhone base: C94 live in iOS, 19.2W into iPhone 13, 0.11V @ 2A/0.9m, mid-span 34.6°C. Same electrical tier as SureIStrong A8652H21 — pick length/jacket. Beats Joyroom JR-S-CL20 on verified MFi. Not for iPhone 15+; not recalled (≠ A8482/A8483/A8465). Red-flag audit: phone caps watts; brick marketing does not.

How we tested it

Per Bench Test Protocol §7.4 (cables) with §8 physics cross-checks and §11 red-flag gate: tip-to-tip length with a 5m fiberglass tape; weight on a Kkmoon 0.01g scale. MFi honesty: visual check for Apple Made for iPhone / MFi logo on the opened package; Lightning-end authentication presence confirmed via FNIRSI FNB58 (fw 1.3) while the cable was inline between an Anker A2147 30W PD wall charger and a live iPhone 13 (battery health 89%, start SoC 22%) — genuine Apple C94 chip detected; iOS accessory-warning behaviour logged over a 45-min session (silent accept). Peak negotiated wattage and 9V PD voltage stability logged on FNB58 during the 22%→45% climb (preserved peak 19.2 W at 9.0 V / 2.13 A); cross-checked with AVHzY CT-3 (agreement 0.05 W). Voltage drop: controlled 2A constant-current at 5V through JUWEI 35W electronic load on the USB-C side plus a Lightning-to-USB-A load jig on the Lightning end (jig for load simulation ONLY — not part of the delivered accessory chain); FNB58 source-vs-load V, AVHzY CT-3 cross-check (±0.01 V); Ohm’s law §8 → 0.11 V ÷ 2 A ≈ 55 mΩ VBUS+GND. Cable surface temperature: BENETECH GM320 (ε=0.95) at three mid-span points and strain-relief after 10 minutes at 5V/2A. Continuity rechecked after 50 manual flex cycles (30° at each strain relief) — Anker's stated bend-test figure NOT translated into a lifetime promise. Real-device pass-through: same brick, iPhone 13 22%→80% climb took 69 minutes (Apple's wired-charge curve, not this cable's limitation). Sibling A/B commentary uses published CairoVolt results for SureIStrong A8652H21 (19.5 W peak, 0.17 V @ 5V/2A over 1.8m, verified MFi, silent iOS). Cross-brand A/B uses Joyroom JR-S-CL20 (18.9 W peak, 0.15 V @ 5V/2A over 1.2m, MFi not verified, iOS accessory warning). Identity / recall / red-flag gate: printed A8612H11 verified — ≠ A8652H21, ≠ A8482/A8483/A8465; do not expect 30W from a 30W brick into Lightning iPhone 13; iPhone 15+ is USB-C native; CarPlay is vehicle-dependent; confirm 0.9m vs 1.8m variant on package. Independent corroboration (not our data): Apple iPhone 13 12.41 Wh + ~20W wired PD ceiling (apple.com/iphone-13/specs, MacRumors); USB-IF PD 3.0 on usb.org (E-marker above 3A/60W — N/A to Lightning auth); anker.com/product-recalls + CPSC 24-187 scope 2026-07-24. Single retail unit; production batches may vary. Not measured this date: in-vehicle CarPlay; independent IC teardown (housings not opened).

Equipment: FNIRSI FNB58 (fw v1.3) (Inline V·A·W logging during real iPhone 13 PD charge; Apple C94 / MFi chip detection; source-vs-load V-drop capture) · AVHzY CT-3 (Cross-check of peak wattage and V-drop — agreement ≤0.05 W / ±0.01 V with FNB58) · Anker A2147 30W USB-C PD wall charger (Real-device peak-power PD source with confirmed 9V/2.22A PDO) · Apple iPhone 13 (3,240 mAh / 12.41 Wh, battery health 89%) (Real-device negotiation, peak power, and iOS accessory-warning observation) · JUWEI 35W USB electronic load + Lightning-to-USB-A load jig (Controlled 5V/2A draw for the V-drop measurement (jig NOT part of the delivered product chain)) · BENETECH GM320 IR thermometer (ε=0.95) (Cable mid-span and strain-relief surface temperature at 5V/2A) · Kkmoon 0.01g scale · 5m fiberglass tape (Weight and tip-to-tip length) · HTC-2 thermo-hygrometer · Uni-T UT61E (Ambient temperature/humidity and mains voltage at test start) · Sibling Anker SureIStrong A8652H21 (1.8m) — reference unit (Same-family A/B for MFi behaviour, iPhone 13 peak power, length/jacket class) · Joyroom JR-S-CL20 (1.2m) — cross-brand reference (Same-lab-week A/B for MFi behaviour, iPhone 13 peak power, and V-drop class)

Metric	Rated	Measured
Recall status (verified 2026-07-24)anker.com/product-recalls + CPSC 24-187 cable scope; PB recalls A1257/A1263/A1647/A1652/A1681/A1689 are a different family	Not listed	NOT recalled — A8612H11 ≠ A8482/A8483/A8465
Identity / MPN gateSKU hygiene — do not merge Anker Lightning siblings or Joyroom CL20 numbers	A8612H11	Printed A8612H11 on housing — not A8652H21, not A8482/A8483/A8465, not JR-S-CL20
Red-flag audit — marketing vs physicsAlso: CarPlay vehicle-dependent; confirm 0.9m vs 1.8m variant; USB 2.0 only	30W brick ≠ 30W into Lightning iPhone	PASS honesty — publish phone-capped 19.2W class; FAIL expectation of 30W from A2147 into iPhone 13; FAIL treating this as iPhone 15+ cable; FAIL confusing with recalled A8482/A8483/A8465
MFi packaging markContrast JR-S-CL20 same week: MFi mark absent	Apple MFi listed	Present on sample package CV-CB-A8612-001
Apple authentication chip (C94 / Lightning end)FNB58 chip detection + real iOS acceptance; JR-S-CL20 same phone showed the warning	Apple MFi authentication IC (C94)	Confirmed — genuine Apple C94 chip detected; iOS accepted the cable silently with no accessory warning across a 45-min charge session
Peak power negotiated (iPhone 13 + A2147 30W)FNB58 inline @ 9.0 V / 2.13 A — AVHzY CT-3 agreement 0.05 W; A8652H21 same brick: 19.5 W; JR-S-CL20: 18.9 W	~20W (Apple wired ceiling for iPhone 13)	19.2 W
Voltage stability under PD loadFNB58 logging — matches SureIStrong band (±0.03 V); normal USB-PD behaviour	—	Stable at 9.01V ±0.03V for the 22%→45% climb (9V/2.1A phase)
Voltage drop @ 5V / 2A (0.9m span)FNB58 source vs load; AVHzY CT-3 ±0.01 V — JR-S-CL20: 0.15 V over 1.2m; A8652H21: 0.17 V over 1.8m	—	0.11 V
Implied VBUS+GND resistance0.11 V ÷ 2 A (Ohm’s law §8) — shorter span than A8652H21 (≈85 mΩ) / JR-S-CL20 (≈75 mΩ)	—	≈ 55 mΩ
Data speed	USB 2.0 (480Mbps)	USB 2.0 — charge/sync/CarPlay data where supported
CarPlayNot bench-tested in-vehicle on this date	—	Vehicle-dependent — MFi alone does not guarantee every head unit
Length (tip-to-tip)Within ±5cm §7.4 tolerance — A8612H11 stocked variant; 1.8m PowerLine variants exist	0.9m (3ft)	93.6 cm
Weight0.01g scale — −1.2 g vs A8652H21 (26 g); +3.8 g vs JR-S-CL20 (21 g)	Not listed on opened sample	24.8 g
Cable mid-span temp @ 5V / 2A (10 min)GM320 IR — ambient 28.4°C; 0.6°C cooler than A8652H21 (35.2°C); 1.8°C cooler than JR-S-CL20 (36.4°C)	—	34.6°C
Strain-relief temp @ 5V / 2A (10 min)no localized heating spike at either connector; A8652H21 strain-relief was 33.9°C	—	33.2°C
iPhone 13 22%→80% real-time charge durationStopwatch + iOS battery % — Apple's wired-charge curve; A8652H21 was 68 min; JR-S-CL20 was 71 min on same phone/brick class	—	69 min
Continuity after 50 bench flex cyclesBench flex only — NOT a certified fatigue test; bend-test claim not lifetime-converted	—	Stable — no intermittent open on VBUS/GND, no data-line dropout
Connector fit	—	Snug — no wobble on Lightning or USB-C end
iPhone 15/16/17 compatibilityUse A8865-class USB-C to USB-C cable instead	—	NOT compatible — those iPhones are USB-C native; Lightning connector does not fit
Sibling A/B vs SureIStrong A8652H21	—	Same MFi class / same phone ceiling — A8612H11 = 0.9m braid 19.2W; A8652H21 = 1.8m soft-touch 19.5W — pick length/jacket, not wattage
Cross-brand A/B summary vs JR-S-CL20	—	Electricals close (19.2W vs 18.9W; 0.11V/0.9m vs 0.15V/1.2m); Anker wins verified MFi / silent iOS; Joyroom wins price and longer 1.2m bag braid

✅ Strengths (measured)

MFi / C94 authentication confirmed live in iOS — 45-min iPhone 13 charge session without the "This accessory may not be supported" warning (JR-S-CL20 same phone showed the warning)
19.2W peak into iPhone 13 from A2147 30W PD — inside Apple's wired ceiling; −0.3W vs A8652H21 (19.5W) and +0.3W vs JR-S-CL20 (18.9W) — phone is the cap
V-drop 0.11V at 5V/2A over 0.9m — ≈55 mΩ implied; within §7.4 band; consistent with an honest short MFi Lightning braid
Compact 0.9m braided jacket (93.6 cm / 24.8 g) — desk and bag friendly; mid-span 34.6°C at 5V/2A — cooler than JR-S-CL20 at same load class
Voltage stability 9.01V ±0.03V during real iPhone 13 PD charge — no PD renegotiation glitches captured on FNB58
NOT recalled — A8612H11 ≠ A8482/A8483/A8465 (verified anker.com/product-recalls + CPSC 24-187 2026-07-24)

⚠️ Limitations (measured)

Lightning connector — NOT for iPhone 15/16/17 (USB-C native); use A8865-class USB-C to USB-C cable instead
Peak wired power is Apple's per-model ceiling (~20W on iPhone 13/14 non-Pro, ~27W on Pro Max) — this is the phone's cap, not the cable's; do not expect 30W just because the brick advertises it
Stocked unit is 0.9m (A8612H11) — 1.8m PowerLine / SureIStrong variants exist for bedroom/back-seat reach; confirm length on the package before ordering
USB 2.0 data only (480Mbps) — 100GB iPhone backups over USB will take 30–40 min; not a USB 3 Lightning cable
CarPlay depends on the vehicle head unit — MFi does not guarantee every car; not bench-tested in-vehicle this date
Premium vs JR-S-CL20 budget braid — if you only need ~118 EGP spare length and accept unverified MFi risk, Joyroom is the cheaper drawer cable
Anker bend-test figure is a manufacturer lab condition — CairoVolt verified continuity after 50 bench flex cycles only, not a lifetime bend count
Single retail unit tested; production batches may vary — verify the printed model "A8612H11", GTIN 0848061099430 and MFi mark on your delivered unit

Sample: CV-CB-A8612-001 · ELEVATED §7.4 gold lock — Wave Adj/Mid. One retail-stock unit — MPN A8612H11 · GTIN 0848061099430 · CairoVolt lab, New Cairo · ambient 28.4°C (HTC-2) · humidity 44% · mains 221V (UT61E) · MFi packaging mark present on sample · sibling A/B same lab week vs SureIStrong A8652H21 (CV-CB-A8652H21-001) · cross-brand A/B vs Joyroom JR-S-CL20 (CV-CB-JRSCL20-001) · NOT on Anker cable recall lists (A8482/A8483/A8465 checked at anker.com/product-recalls + CPSC 24-187 scope 2026-07-24)

Tested: 24 July 2026 · By: Eng. Omar Khaled — Lead Technician

A real measurement of one unit — indicative, not guaranteed for every unit; verify on the unit you receive.

Browse Also

Soundcore by Anker — Audio Sub-Brand Hub Power Banks Wall Chargers